MAMX-011036 Double-Balanced Mixer Rev. V3 8 to 43 GHz Features Functional Schematic Low Conversion Loss: 8.5 dB High Linearity: 20 dBm IIP3 Wide IF Bandwidth: DC to 10 GHz 12 11 10 High Isolation Lead-Free 3 mm 12-lead AQFN package 1 9 RoHS* Compliant LO RF 2 8 Description MAMX-011036 is a double-balanced passive diode 3 7 mixer housed in a 3 mm, 12-lead AQFN package. IF The mixer offers low conversion loss, high linearity and a wide IF bandwidth. The double-balanced 4 5 6 circuit configuration provides excellent port isolation while internal 50 matching simplifies its application. 3 Pin Configuration This mixer is well suited for applications such as test and measurement, microwave radio and radar. Pin Function 1, 3, 4, 6, 7, 9 Ground MAMX-011036 is also available in die form. Refer to datasheet MAMX-011036-DIE. 2 LO 5 IF 1,2 Ordering Information 8 RF 3 10 - 12 No Connection Part Number Package 4 13 Paddle MAMX-011036 Bulk MAMX-011036-TR0100 100 Piece Reel 3. MACOM recommends connecting unused package pins to ground. 4. The exposed pad centered on the package bottom must be MAMX-011036-TR0500 500 Piece Reel connected to RF, DC and thermal ground. MAMX-011036-SB1 Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 1 1 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAMX-011036 Double-Balanced Mixer Rev. V3 8 to 43 GHz 5 Electrical Specifications : F = 500 MHz, P = 15 dBm, T = 25C, Z = 50 IF LO A 0 Parameter Test Conditions Units Min. Typ. Max. LO and RF Frequency GHz 8 43 IF Frequency GHz 0 10 LO Power dBm 15 8 - 20 GHz 8.5 10 Conversion Loss 20 - 34 GHz dB 8.5 10.5 34 - 43 GHz 9.5 13 Input P1dB dBm 13 Input IP3 P = -10 dBm/tone, Df = 1 MHz dBm 20 RF Input IP2 P = -10 dBm/tone, Df = 1 MHz dBm 45 RF LO-to-RF Isolation dB 40 8 - 20 GHz 30 40 LO-to-IF Isolation 20 - 34 GHz dB 25 35 34 - 43 GHz 25 40 8 - 20 GHz 8 9 RF-to-IF Isolation 20 - 34 GHz dB 15 25 34 - 43 GHz 17 35 RF Return Loss RF = 25 GHz dB 7 IF Return Loss IF = 500 MHz dB 12 5. All specifications refer to down-conversion operation, unless otherwise noted. 6,7 Handling Procedures Absolute Maximum Ratings Please observe the following precautions to avoid Parameter Absolute Maximum damage: LO Power 23 dBm Static Sensitivity RF or IF Power 20 dBm These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged 8 Junction Temperature +150C by static electricity. Proper ESD control techniques Operating Temperature -55C to +85C should be used when handling these devices with the following rating: Storage Temperature -65C to +150C HBM Class 1B 6. Exceeding any one or combination of these limits may cause CDM Class C5 permanent damage to this device. 7. MACOM does not recommend sustained operation near these Assembly Information survivability limits. 8. Operating at nominal conditions with T +150C will ensure J Do not subject the device to excessive force, 6 MTTF > 1 x 10 hours. especially at elevated temperatures > 60C. No-clean flux is required for assembly. Post SMT washing is not recommended. 2 2 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: