MAPDCC0001 MACOM

MAPDCC0001 Low Cost Two-Way SMT Power Divider Rev. V4 824-960 MHz Features Functional Block Diagram Small Size and Low Profile Excellent Amplitude and Phase Balance Superior Repeatability Typical Insertion Loss 0.5 dB Typical Isolation 23 dB 1 Watt Power Handling Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free Green Mold Compound 260C Reflow Compatible RoHS* Compliant Version of DS52-0001 Description M/A-COMs MAPDCC0001 is an IC-based monolithic power divider in a low cost SOIC-8 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include base station switching networks and other communication applications where size and PCB real estate are a premium. Available in tape and reel. The MAPDCC0001 is fabricated using a passive- integrated circuit process. The process features full -chip passivation for increased performance and reliability. Pin Configuration Pin No. Function 1 GND Ordering Information 2 RF-IN 3 GND Part Number Package MAPDCC0001 Bulk Packaging 4 GND MAPDCC0001TR 1000 piece reel 5 RF-1 (out) MAPDCC0001-TB Sample Test Board 6 GND 7 GND Note: Reference Application Note M513 for reel size information. 8 RF-2 (out) * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAPDCC0001 Low Cost Two-Way SMT Power Divider Rev. V4 824-960 MHz 1 Electrical Specifications : T = +25C A Parameter Units Min Typ Max Insertion Loss Above 3.0dB dB 0.5 0.6 Isolation dB 15 23 VSWR Input 1.35:1 1.5:1 Output 1.25:1 1.4:1 Amplitude Balance dB 0.05 0.15 Phase Balance Deg. 0.5 1.5 1. All specifications apply with a 50-Ohm source and load impedance. Recommended PCB Configuration 2,3 Absolute Maximum Ratings Parameter Absolute Maximum 4 Input Power 1 W CW Operating Temperature -40C to +85C Storage Temperature -65C to +150C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With Internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: