MAPDCC0002 MACOM

MAPDCC0002 Low Cost Two-Way SMT Power Rev. V3 Divider, 1850 - 1990 MHz Features Functional Block Diagram Small Size and Low Profile Industry Standard SOIC-8 SMT Plastic Package Excellent Amplitude and Phase Balance Superior Repeatability Typical Insertion Loss 0.7 dB Typical Isolation 21 dB 1 Watt Power Handling Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free Green Mold Compound 260C Reflow Compatible RoHS* Compliant Version of DS52-0002 Description M/A-COMs MAPDCC0002 is an IC-based monolithic power divider in a low cost SOIC-8 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include base station switching networks and other communication appli- cations where size and PCB real estate are a pre- mium. Available in tape and reel. The MAPDCC0002 is fabricated using a passive- integrated circuit process. The process features full- chip passivation for increased performance and reliability. Pin Configuration Ordering Information Pin No. Function 1 GND Part Number Package 2 RF-IN MAPDCC0002 Bulk Packaging 3 GND MAPDCC0002TR 1000 piece reel 4 GND MAPDCC0002-TB Sample Test Board 5 RF-1 (out) Note: Reference Application Note M513 for reel size 6 GND information. 7 GND 8 RF-2 (out) * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAPDCC0002 Low Cost Two-Way SMT Power Rev. V3 Divider, 1850 - 1990 MHz 1 Electrical Specifications : T = 25C A Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Above 3.0 dB 1850 - 1990 dB 0.5 0.6 Isolation 1850 - 1990 dB 15 21 VSWR Input RL 1850 - 1990 Ratio 1.2:1 1.4:1 VSWR Output RL 1850 - 1990 Ratio 1.4:1 1.6:1 Amplitude Balance 1850 - 1990 dB 0.05 0.15 Phase Balance 1850 - 1990 Deg. 1.0 3.0 1. All specifications apply with a 50-ohm source and load impedance. 2,3 Absolute Maximum Ratings Parameter Absolute Maximum 4 Recommended PCB Configuration Input Power 1W CW Operating Temperature -40C to +85C Storage Temperature -65C to +150C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With internal load dissipation of 0.125W maximum Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: