MAPDCC0004 MACOM

MAPDCC0004 Low Cost Two-Way SMT Power Rev. V3 Divider, 1700 - 1900 MHz Features Functional Block Diagram Small Size and Low Profile Industry Standard SOIC-8 SMT Plastic Package Superior Repeatability Excellent Amplitude Balance: 0.05 dB Typical Excellent Insertion Loss: 0.3 dB Typical Low Cost DCS-1800 Frequency Coverage Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free Green Mold Compound 260C Reflow Compatible RoHS* Compliant Version of DS52-0005 Description M/A-COMs MAPDCC0004 is an IC-based monolithic power divider in a low cost SOIC-8 plastic package. This 2-way power splitter is ideally suited for applications where small size, low profile and low cost, without sacrificing performance are required. Typical applications include base station, portables and PCMCIA cards for DCS-1800 European applica- tions. Available in tape and reel. The MAPDCC0004 is fabricated using a passive- integrated circuit process. The process features full- chip passivation for increased performance and reliability. Pin Configuration Pin No. Function Ordering Information 1 GND 2 RF-IN Part Number Package 3 GND MAPDCC0004 Bulk Packaging 4 GND MAPDCC0004TR 1000 piece reel 5 RF-1 (out) MAPDCC0004-TB Sample Test Board 6 GND Note: Reference Application Note M513 for reel size 7 GND information. 8 RF-2 (out) * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAPDCC0004 Low Cost Two-Way SMT Power Rev. V3 Divider, 1700 - 1900 MHz 1 Electrical Specifications : T = 25C A Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Above 3.0 dB 1700 - 1900 dB 0.3 0.5 Isolation 1700 - 1900 dB 15 20 VSWR 1700 - 1900 Ratio 1.3:1 1.5:1 Amplitude Balance 1700 - 1900 dB 0.1 0.15 Phase Balance 1700 - 1900 Deg 2 4 1. All specifications apply with a 50-ohm source and load impedance. 2,3 Absolute Maximum Ratings Parameter Absolute Maximum Recommended PCB Configuration 4 Input Power 1W CW Operating Temperature -40C to +85C Storage Temperature -65C to +150C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With internal load dissipation of 0.125W maximum Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: