MAPDCC0011-TR MACOM

MAPDCC0011 Low Cost Two-Way GMIC SMT Power Divider Rev. V2 824 960 MHz Features Functional Diagram Small Size and Low Profile Industry Standard SOT-26 SMT Plastic Package Typical Insertion Loss: 0.6 dB Typical Isolation: 15 dB 1 Watt Power Handling Lead-Free SOT-26 Package 100% Matte Tin Plating over Copper Halogen-Free Green Mold Compound 260C Reflow Compatible RoHS* Compliant Version of DS52-0008 Description M/A-COMs MAPDCC0011 is an IC-based monolithic power divider using M/A-COMs GMIC technology in a low cost SOT-26 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include personal communication systems and other communication Pin Configuration applications where size and PCB real estate are at a premium. Available in tape and reel. Pin No. Function Pin No. Function 1 RF1 4 GND The MAPDCC0011 is fabricated using a passive- integrated circuit process. The process features full- 2 GND 5 RF IN chip passivation for increased performance and 3 RF2 6 GND reliability. Ordering Information Part Number Package MAPDCC0011 Bulk Packaging MAPDCC0011-TR 1000 piece reel MAPDCC0011-TB Sample Test Board Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAPDCC0011 Low Cost Two-Way GMIC SMT Power Divider Rev. V2 824 960 MHz 1 Electrical Specifications: T = 25C A Parameter Units Min Typ Max dB 0.6 0.8 Insertion Loss Above 3.0 dB dB 13 15 Isolation 1.3:1 1.4:1 VSWR Input 1.3:1 1.5:1 RF1, RF2 Outputs dB 0.1 0.25 Amplitude Balance Deg. 3 5 Phase Balance 1. All specifications apply with a 50-ohm source and load impedance. Recommended PCB Configuration 2,3 Absolute Maximum Ratings Parameter Absolute Maximum 4 Input Power 1W CW Operating Temperature -40C to +85C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: