MASL-011023 SPDT Switch & Limiter Rev. V4 2.7 - 3.5 GHz Features Functional Block Diagram 125 W CW T Input Power Handling +85C X N/C N/C ANT N/C N/C N/C N/C N/C Baseplate 32 30 25 Integrates SP2T & Limiter Function N/C A1 24 1 Low T and R Insertion Loss X X High Isolation on Receive Path LOAD N/C 2 10 dBm R Flat Leakage X LOAD G1 3 22 Operates from +/-5 V & +30 V N/C Ultra Fast Recovery Time <100 ns Switch N/C Surface Mount 7 mm 32-lead HQFN JEDEC N/C B2 20 MSL1 Package N/C N/C RoHS* Compliant and 260C Reflow Compatible N/C N/C Limiter Description N/C N/C 8 17 The MASL-011023 is a plastic packaged high power 9 16 switch-limiter with integrated bias networks. This N/C N/C N/C N/C N/C N/C N/C R X surface mount, small configuration is designed with minimal parasitics usually associated with hybrid Pin Configuration MIC designs incorporating beam lead and/or Pin Pin Name Description bondable PIN diodes that require chip and wire assembly. This standard HQFN enables reliable, 1 N/C No Connection repeatable high volume manufacturing with 2 LOAD T Port X MACOMs design techniques to maximize heat dissipation in a plastic package. 3 LOAD T Port X 4 - 15 N/C No Connection This SP2T switch-limiter is designed to optimize Ant to R loss and handle +51 dBm CW through the 16 R R Port X X X T path to an external high power 50 termination. X 17 - 19 N/C No Connection This device incorporates a high power SP2T switch, 20 B2 Bias a limiter function, and a fully integrated RF & DC bias network. 21 N/C No Connection 22 G1 Ground The MASL-011023 is designed to be used in 2.7 - 3.5 GHz higher power switch applications that 23 N/C No Connection require high volume, surface mount, solder reflow 24 A1 No Connection manufacturing. It is RoHS compliant, durable, 25 - 29 N/C No Connection reliable and capable of meeting all military, commercial, and industrial environments. 30 ANT Antenna 31, 32 N/C No Connection Ordering Information 1 33 Ground Paddle Part Number Package 1. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. MASL-011023 Bulk Packaging MASL-011023-TR0500 500 piece reel MASL-011023-001SMB Sample Board * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MASL-011023 SPDT Switch & Limiter Rev. V4 2.7 - 3.5 GHz Electrical Specifications: Freq: 2.7 - 3.5 GHz, T = +25C, P = -10 dBm, Z = 50 A IN 0 Parameter Condition Units Min. Typ. Max. R Mode 0.85 1.5 X Insertion Loss dB T Mode 1 0.25 X ANT to T Port, R Mode 17 X X Isolation dB ANT to R Port, T Mode 1 25 30 X X ANT & R ports, R Mode 14 X X Return Loss dB ANT & T ports, T Mode 1 14 X X T Mode 1 51 X CW Input Power, R Mode dBm 33 X ANT port all Driver Conditions, also un-biased 33 T P0.1dB Compression T Mode 1 dBm 51 X X Flat Leakage 33 dBm P , R Mode dBm 10 IN X R Leakage 51 dBm P , T Mode 1 dBm 7 X IN X 2 Switching Time 50% TTL Control to 90% RF Voltage ns 700 Limiter Recovery Time P <+33 dBm to -10 dBm, IN ns <100 to Final Insertion Loss 300 s pulse, 50% duty cycle, R Mode X Spike Leakage 300 s pulse, 50% duty cycle, R Mode ergs <0.1 X 2. Actual results are driver-dependent. 3,4,5 Absolute Maximum Ratings Driver Conditions Parameter Absolute Maximum Control Level DC Voltages (resulting currents) Condition of Operating Temperature -55C to +85C G1 = Ground, A1 = N/C RF Output Storage Temperature -65C to +150C B3 B1 6 T Mode 1 Junction Temperature +175C 7 X -5 V (-35 mA ) +30 V (132 mA) R = 120 RX Applied Reverse Voltage 100 V T Mode 2 7 X -5 V (-25 mA ) +30 V (132 mA) R = 160 RX T RF CW Incident Power 125 W +85C X 7 +5 V (+17 mA ) -5 V (0 mA) R Mode T Bias Current +25C 150 mA RX X 3. Exceeding any one or combination of these limits may cause 7. Current is controlled externally, with R in parallel with a RX permanent damage to this device. switching diode. Rcom is 220 . G1 is connected to ground 4. MACOM does not recommend sustained operation near these externally. See Application Circuit Diagram. survivability limits. 5. Operating at nominal conditions with T +175C will ensure J 6 MTTF > 1 x 10 hours. 6. T path typical thermal resistance ( jc) = 12.6 CW dissipated. X 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: