MASW-000105 GaAs SP6T 2.5 V High Power Switch Rev. V1 Dual- / Tri- / Quad-Band GSM Applications Functional Block Diagram Features Dual- / tri- / quad-band GSM / GPRS / EDGE Tx1 VTx1 ANT VTx2 Tx2 2.5V Operation Harmonics: -70 dBc +34.5 dBm & 1 GHz 1 GND Insertion Loss: 0.5 dB 1 GHz GND T - R Isolation: 41 dB 2 GHz X X GND GND Lead-Free 4 mm 20-Lead PQFN Package RoHS Compliant* and 260C Reflow Compatible VRx1 VRx4 Description GND GND M/A-COMs MASW-000105 is a GaAs PHEMT MMIC single pole six throw (SP6T) high power Rx4 Rx1 switch in a 4 mm PQFN package. Designed for dual-, tri-, or quad-band GSM/GPRS/EDGE mobile Rx2 VRx2 VRxC VRx3 Rx3 devices, the MASW-000105 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size and Pin Configuration low cost are required. This part can be used in all Pin No. Function Description systems operating up to 2.5 GHz requiring high power at low control voltage. 1 GND Ground 2 GND Ground The MASW-000105 is fabricated using a 0.5 micron 3 VRx1 Rx1 Control gate length GaAs PHEMT process. The process 4 GND Ground features full passivation for performance and reliability. 5 Rx1 Rx1 Port 6 Rx2 Rx2 Port The MASW-000105 can also be purchased in die 7 VRx2 Rx2 Control form as the MASWSS0091. 8 VRxC Rx Common Control 9 VRx3 Rx3 Control 10 Rx3 Rx3 Port 11 Rx4 Rx4 Port 1,2 12 GND Ground Ordering Information 13 VRx4 Rx4 Control Part Number Package 14 GND Ground MASW-000105-TR3000 3000 piece reel 15 GND Ground 16 Tx2 Tx2 Port MASW-000105-001SMB Sample Test Board 17 VTx2 Tx2 Control 1. Reference Application Note M513 for reel size information. 18 ANT ANT Pad 2. All sample boards include 5 loose parts. 19 VTx1 Tx1 Control 20 Tx1 Tx1 Port 3 21 Paddle RF and DC Ground 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MASW-000105 GaAs SP6T 2.5 V High Power Switch Rev. V1 Dual- / Tri- / Quad-Band GSM Applications 4 Electrical Specifications: T = 25C, V = 0V/2.5V, Z = 50 A C 0 Parameter Test Conditions Units Min. Typ. Max. Ant - T 0.5 - 1.0 GHz - 0.5 0.7 X dB 1.0 - 2.0 GHz - 0.7 - 5 Insertion Loss Ant - R 0.5 - 1.0 GHz - 1.0 1.2 X dB 1.0 - 2.0 GHz - 1.3 - T to R , T On 0.5 - 1.0 GHz 40 47 - X X X dB 1.0 - 2.0 GHz - 41 - T to T , T On 0.5 - 1.0 GHz 20 27 - X X X dB 1.0 - 2.0 GHz - 21 - Isolation R to T , R On 0.5 - 1.0 GHz - 26 - X X X dB 1.0 - 2.0 GHz - 21 - R to R , R On 0.5 - 1.0 GHz - 37 - X X X dB 1.0 - 2.0 GHz - 33 - 0.5 - 1.0 GHz - 18 - Return Loss dB 1.0 - 2.0 GHz - 16 - T P0.1dB V = 0 V / 2.5 V dBm - 36 - X C R P1dB V = 0 V / 2.5 V dBm - 24 - X C T to ANT - 60 - X IP3 dBm ANT to R - 50 - X 0.5 - 1.0 GHz - 71 - 2nd Harmonic dBc 1.0 - 2.0 GHz - 70 - 0.5 - 1.0 GHz - 74 - 3rd Harmonic dBc 1.0 - 2.0 GHz - 66 - 10% to 90% RF, Trise, Tfall s - 0.5 - 90% to 10% RF 50% control to 90% RF, Ton, Toff s - 0.9 - 50% control to 10% RF Transients In Band mV - 30 - Control Current V = 2.5 V A - 20 50 C 4. External DC blocking capacitors are required on all RF ports. 5. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 100 pF for 0.5 GHz - 2.0 GHz. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: