MASW-004103-1365 Silicon SP4T Surface Mount HMIC PIN Diode Switch Rev. V7 50 MHZ - 20 GHz Features Operates 50 MHz to 20 GHz Usable up to 26 GHz Low Insertion Loss High Isolation Low Parasitic Capacitance and Inductance RoHS Compliant Surmount Package Rugged, Fully Monolithic Glass Encapsulated Construction Up to +38 dBm CW Power Handling +25C Silicon Nitride Passivation Polymer Scratch Protection Functional Schematic Solderable Description J3 J4 The MASW-004103-1365 is a SP4T, surmount, broadband, monolithic switch using four sets of series and shunt connected PIN diodes. This device is designed for use in broadband, low to moderate signal, high performance, switch applications up to 20 GHz. It is a surface mountable switch configured for optimized performance and offers a distinct J2 J5 advantage over MMIC, beamlead and chip and wire hybrid designs. Because the PIN diodes of the MASW-004103-1365 are integrated into the chip J1 and kept within close proximity, the parasitics typically associated with other designs that use individual components are kept to a minimum. Pin Configuration To minimize the parasitics and achieve high Pin Function performance the MASW-004103-1365 is fabricated using MACOMs patented HMIC (Heterolithic J1 RFC Microwave Integrated Circuit) process. This process J2 RF1 allows the silicon pedestals, which form the series and shunt diodes or vias, to be imbeded in low loss, J3 RF2 low dispersion glass. The combination of low loss glass and using tight spacing between elements J4 RF3 results in an HMIC device with low loss and high J5 RF4 isolation through low millimeter wave frequencies. The topside is fully encapsulated with silicon nitride and also has an additional layer of polymer for scratch and impact protection. The protective Ordering Information coating guards against damage to the junction and the anode airbridges during handling and assembly. Part Package MASW-004103-13650G 50 piece gel pack On the backside of the chip gold metalized pads have been added to produce a solderable surmount MASW-004103-13655P 500 piece reel device. MASW-004103-13650P 3000 piece reel MASW-004103-001SMB Sample Test Board 111 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. MASW-004103-1365 Silicon SP4T Surface Mount HMIC PIN Diode Switch Rev. V7 50 MHZ - 20 GHz Electrical Specifications: T = 25C, P = 0 dBm, Z = 50 , 20 mA, -10 V A IN 0 Parameter Conditions Units Min. Typ. Max. 6 GHz 0.5 0.6 Insertion Loss 13 GHz dB 0.8 1.0 20 GHz 1.2 1.5 6 GHz 48 51 Isolation 13 GHz dB 38 39 20 GHz 29 32 6 GHz 17 21 Input Return Loss 13 GHz dB 13 17 20 GHz 12 16 6 GHz 53.5 Output to Output Isolation 13 GHz dB 41.5 20 GHz 31.5 Input 0.1 dB Compression Point 2 GHz dBm 36 0.5 GHz, 5 MHz Spacing, 20 dBm 60 IIP3 1 GHz, 10 MHz Spacing, 20 dBm dBm 63 2 GHz, 10 MHz Spacing, 20 dBm 64 1 Switching Speed ns 20 2 Voltage Rating V 80 1. Typical Switching Speed measured from 10% to 90 % of detected RF signal driven by TTL compatible drivers. 2. Maximum reverse leakage current in either the shunt or series PIN diodes shall be 0.5 A maximum -80 volts. 3,4,5 Handling Procedures Absolute Maximum Ratings Please observe the following precautions to avoid Parameter Absolute Maximum damage: RF CW Incident Power Static Sensitivity 2 GHz 38 dBm 20 GHz 33 dBm These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged Applied Reverse Voltage -80 V by static electricity. Proper ESD control techniques should be used when handling these Class 1A HBM Junction Temperature +175C devices. Operating Temperature -65C to +125C Storage Temperature -65C to +150C 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. MACOM does not recommend sustained operation near these survivability limits. 5. Combined maximum operating conditions for RF power, DC bias, & temperature: 33 dBm CW, 20 mA per diode, +85C. 222 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information.