MASW-007071-000100 GaAs SPDT Switch, Absorptive, Rev. V4 Single Supply, DC-4.0 GHz Features 1,2,3,4 Pin Configuration Operates DC - 4 GHz on Single Supply ASIC TTL / CMOS Driver Pin No. Function Pin No. Function Low DC Power Consumption 1 NC 17 NC 50 Ohm Nominal Impedance 2 GND 18 C1 Test Boards are Available Tape and Reel are Available 3 RFC 19 NC Lead-Free 4 x 6 mm PQFN Package 4 GND 20 V CC 100% Matte Tin Plating over Copper 5 NC 21 NC Halogen-Free Green Mold Compound 260C Reflow Compatible 6 NC 22 NC RoHS* Compliant Version of SW90-0002 7 GND 23 CP1 8 RF1 24 CP2 Description 9 GND 25 NC M/A-COM s MASW-007071-000100 is a SPDT ab- 10 NC 26 V EE sorptive pHEMT switch with integral TTL driver. This 11 NC 27 NC device is in an PQFN plastic surface mount package. This switch offers excellent broadband 12 V 28 NC EE performance and repeatability from DC to 4 GHz, 13 NC 29 NC while maintaining low DC power dissipation. The MASW-007071-000100 is ideally suited for wireless 14 V 30 GND CC infrastructure applications. 15 NC 31 RF2 16 NC 32 GND 1. NC = No Connection 2. VEE is internally generated and must remain isolated from external power supplies. Generated noise is typical of switching DC-DC Converters. 3. Connections and external components shown in functional Ordering Information schematic are required. 0.1 F Capacitors need to be located near pins 20 & 26. 4. The exposed pad centered on the package bottom must be Part Number Package connected to RF and DC ground. (For PQFN Packages) MASW-007071-000100 Bulk Packaging MASW-007071-0001TR 1000 piece reel Truth Table (Switch) MASW-007071-0001TB Sample Test Board Control Input Condition of the Switch Note: Reference Application Note M513 for reel size information. RF Common to each RF Port C1 RF1 RF2 0 Off On 1 On Off 0 = TTL Low 1 = TTL High * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MASW-007071-000100 GaAs SPDT Switch, Absorptive, Rev. V4 Single Supply, DC-4.0 GHz Electrical Specifications: T = 25C, Z = 50 A 0 Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss RFCRF1,RF2 DC - 4.0 GHz dB 1.8 (Logic per truth table) Isolation RF1RF2 (All Logic 0) DC - 4.0 GHz dB 30 VSWR On (RFC,RF1, RF2) DC - 4.0 GHz Ratio 2.0:1 (Logic per truth table) VSWR Off (RF1, RF2) DC - 4.0 GHz Ratio 1.8:1 (Logic per truth table) 1 dB Compression 50 MHz dBm 18 0.5 - 4.0 GHz dBm 29 Input IP Two-tone inputs up to +5 dBm 50 MHz dBm 36 3 0.5 - 4.0 GHz dBm 46 Switching Speed Ton (50% Control to 10% RF) ns 31 Toff (50% Control to 90% RF) ns 19 Trise (10% to 90% RF) ns 6 Tfall (90% to 10% RF) ns 2 Vcc V 4.5 5.0 5.5 V LOW-level input voltage V 0.0 0.8 IL V HIGH-level input voltage V 2.0 5.0 IH lin (Input Leakage Current) Vin = V or GND uA -1.0 1.0 CC 5 Icc Vcc min to max, Logic 0 or 1 mA 5 8 6 Turn-on Current For guaranteed start-up mA 125 Icc V = Max, Vcntrl = V - 2.1 V mA 1.0 CC CC (Additional Supply Current Per TTL Input Pin) Switching Noise Generated from DC-DC Converter 3.5 MHz dBm -93 with recommended capacitors Thermal Resistance jc C/W 15 5. During turn-on, the device requires an initial start up current (Icc) specified as Turn-on Current. Once operational, Icc will drop to the specified levels. 6. The DC-DC converter is guaranteed to start in 100 s as long as the power supplies have the maximum turn-on current available for start-up. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: