MASW-007075 GaAs SPDT Absorptive Switch with Rev. V4 ASIC Driver, DC-3.0 GHz Features Functional Block Diagram Typical Isolation: 36 dB (2,000 MHz) Typical Insertion Loss: 1.8 dB (2,000 MHz) Integral ASIC TTL/CMOS Driver Low DC Power Consumption PIN 1 RFC GND PIN 24 50 Ohm Nominal Impedance GND GND Tape and Reel Packaging Available Test Boards Available GND GND Lead-Free SOW-24 Package GND GND 100% Matte Tin Plating over Copper Halogen-Free Green Mold Compound GND GND 260C Reflow Compatible RF1 RF2 RoHS* Compliant Version of SW65-0114 GND GND Description GND VEE M/A-COM s MASW-007075-000100 is a GaAs MMIC GND GND absorptive SPDT switch with an integral silicon ASIC VCC GND driver. This device is in a 24-lead plastic package. This switch offers excellent broadband performance GND GND and repeatability from DC to 3 GHz, while maintaining low DC power dissipation. The MASW- C1 PIN 13 PIN 12 C2 007075-000100 is ideally suited for wireless infrastructure applications. Also available in ceramic package with improved performance. Pin Configuration Pin No. Function Pin No. Function 1 RFC 13 C1 Ordering Information 2 GND 14 GND 3 GND 15 GND Part Number Package 4 GND 16 GND MASW-007075-000100 Bulk Packaging 5 GND 17 GND MASW-007075-0001TR 1000 piece reel 6 RF2 18 GND MASW-007075-0001TB Sample Test Board 7 GND 19 RF1 8 V 20 GND EE Note: Reference Application Note M513 for reel size 9 GND 21 GND information. 10 V 22 GND CC 11 GND 23 GND 12 C2 24 GND * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MASW-007075 GaAs SPDT Absorptive Switch with Rev. V4 ASIC Driver, DC-3.0 GHz Electrical Specifications: T = 25C, Z = 50 A 0 Parameter Test Conditions Units Min Typ Max Insertion Loss DC - 3.0 GHz dB 1.8 2.2 Isolation DC - 3.0 GHz dB 33 36 (All arms off) DC - 3.0 GHz VSWR On 1.7:1 2.2:1 Off 2.1:1 2.2:1 1 T T 10%/90%, 90%/10% ns - 15 50 rise fall T T 50% TTL to 90%/10% RF ns 50 150 on off Transients In-band (peak to peak) mV 50 150 1 dB Compression .05 GHz dBm +20 .5 - 3.0 GHz dBm +27 Input IP Two tone inputs 0.05 GHz dBm +35 3 up to +5 dBm 0.5 - 3.0 GHz dBm +46 V V +4.5 +5.0 +5.5 CC V V -8.0 -5.0 -4.75 EE V LOW-level input voltage V 0.0 0.8 IL V HIGH-level input voltage V 2.0 5.0 IH lin (Input Leakage Current) Vin = V or GND uA -1.0 1.0 CC Icc Vcntrl = V or GND uA 250 400 CC (Quiescent Supply Current) Icc V = Max, Vcntrl = V - 2.1 V mA 1.0 CC CC (Additional Supply Current Per TTL Input Pin) IEE VEE min to max, Vin = V or V mA -1.0 -0.2 IL IH 1. Decoupling capacitors (.01 F) are required on the power supply lines. Handling Procedures 2,3 Absolute Maximum Ratings Please observe the following precautions to avoid Parameter Absolute Maximum damage: Max. Input Power 0.05 GHz +27 dBm Static Sensitivity 4 0.5 - 3.0 GHz +34 dBm Gallium Arsenide Integrated Circuits are sensitive V -0.5V V +7.0V CC CC to electrostatic discharge (ESD) and can be V -8.5V V +0.5V EE EE damaged by static electricity. Proper ESD control techniques should be used when handling these V - V -0.5V V - V 14.5V CC EE CC EE devices. 5 Vin -0.5V Vin V + 0.5V CC Operating Temperature -40C to +85C Storage Temperature -65C to +125C Truth Table 2. Exceeding any one or combination of these limits may cause TTL Control Input RF Common To: permanent damage to this device. 3. M/A-COM does not recommend sustained operation near C1 C2 RF1 RF2 these survivability limits. 4. When the RF input is applied to the terminated port, the 1 0 On Off absolute maximum power is +30 dBm. 0 1 Off On 5. Standard CMOS TTL interface, latch-up will occur if logic 22 2 signal is applied prior to power supply. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: