MASW-008330 V GaAs SP3T 2.5 V Switch Rev. V1 DC - 3.0 GHz Features Functional Schematic Low Voltage Operation: 2.5V Low Insertion Loss: 0.3 dB at 1 GHz 100 pF 100 pF 0.5 micron GaAs PHEMT Process RF3 RFC Lead-Free 2 mm 8-Lead PDFN Package 100% Matte Tin Plating over Copper GND V3 Halogen-Free Green Mold Compound 260C Reflow Compatible RoHS* Compliant version of MASWSS0028 V1 V2 Description RF1 RF2 M/A-COMs MASW-008330 is a GaAs PHEMT 100 pF 100 pF MMIC single pole three throw (SP3T) switch in a lead-free 2 mm 8-lead PDFN package. The MASW- 008330 is ideally suited for applications where low control voltage, low insertion loss, high isolation, Pin Configuration small size and low cost are required. Pin No. Function Description Typical applications are for filter and antenna 1 RFC RF In/Out switching in handset systems that connect separate 2 GND RF Ground receive functions to a common antenna, as well as 3 V1 Control 1 other related handset and general purpose applications. This part can be used in all systems 4 RF1 RF In/Out operating up to 3 GHz requiring low control voltage. 5 RF2 RF In/Out 6 V2 Control 2 The MASW-008330 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process 7 V3 Control 3 features full passivation for performance and 8 RF3 RF In/Out reliability. 1 3,4 Ordering Information Absolute Maximum Ratings Part Number Package Parameter Absolute Maximum Max Input Power MASW-008330-TR3000 3000 piece reel +32 dBm (0.5 - 3 GHz, 2.5V Control) MASW-008330-TR3000 3000 piece reel Voltage 8.5 volts Sample Test Board MASW-008330-001SMB Operating Temperature -40 C to +85 C (Includes 5 samples) Storage Temperature -65 C to +150 C 1. Reference Application Note M513 for reel size information. 2 3. Exceeding any one or combination of these limits may cause Truth Table permanent damage to this device. RFC - RFC - RFC - 4. M/A-COM does not recommend sustained operation near V1 V2 V3 RF1 RF2 RF3 these survivability limits. 0 1 0 On Off Off 1 0 0 Off On Off 0 0 1 Off Off On 2. 0 = 0 V 0.2 V, 1 = +2.5 V to +5 V. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MASW-008330 GaAs SP3T 2.5 V Switch Rev. V1 DC - 3.0 GHz 5 Electrical Specifications: T = 25C, V = 0 V / 2.5 V, Z = 50 A C 0 Parameter Test Conditions Units Min. Typ. Max. DC - 1 GHz dB 0.3 0.4 6 Insertion Loss 1 - 2 GHz dB 0.5 0.6 2 - 3 GHz dB 0.75 1.0 DC - 1 GHz dB 19 24 Isolation 1 - 2 GHz dB 13 18 2 - 3 GHz dB 10 14 DC - 2.5 GHz dB 25 Return Loss 2.5 - 3 GHz dB 20 Two Tone, +0 dBm/tone, 1 MHz Spacing, IP3 dBm 50 > 50 MHz P1dB dBm 21 Trise, Tfall 10% to 90% RF, 90% to 10% RF nS 13 Ton, Toff 50% control to 90% RF and 50% control to 10% RF nS 15 Transients In Band mV 30 Control Current V = 2.5V A 1 10 C 5. External DC blocking capacitors are required on all RF ports. 6. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 100 pF for 100 - 500 MHz, 39 pF for 0.5 - 3 GHz. Lead Free 2 mm 8-lead PDFN Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: