MASW-008543 SPDT High Isolation Terminated Switch Rev. V4 0.01- 4.0 GHz Features Functional Block Diagram Positive Voltage Control Pin 1 High Isolation: 62 dB 1 GHz 65 dB 2 GHz 1 8 Low Insertion Loss: 0.65 dB 1 GHz 2 7 0.70 dB 2 GHz 50 Internal Terminations Fast Settling for Low Gate Lag requirements 6 3 Lead-Free MSOP-8-EP Package Halogen-Free Green Mold Compound 4 5 RoHS* Compliant and 260C Reflow Compatible Description The MASW-008543 GaAs monolithic switch 3 provides high isolation in a lead-free, plastic surface Pin Configuration mount package. This device is ideal for applications Pin Function Pin Function across a broad range of frequencies. 1 V1 5 RF Port 2 MACOM fabricates the MASW-008543 using a 0.5-micron gate length pHEMT process. The 2 V2 6 Ground process features full chip passivation for performance and reliability. 3 RF Common 7 Ground 4 Ground 8 RF Port 1 3. The exposed pad centered on the package bottom must be 1,2 connected to RF and DC ground. Ordering Information Part Number Package Handling Procedures MASW-008543-000000 Bulk Packaging Please observe the following precautions to avoid MASW-008543-TR3000 3000 piece reel damage: MASW-008543-001SMB Sample Board Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive 1. Reference Application Note M513 for reel size information. to electrostatic discharge (ESD) and can be 2. All sample boards include 5 loose parts. damaged by static electricity. Proper ESD control techniques should be used when handling these devices. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: MASW-008543 SPDT High Isolation Terminated Switch Rev. V4 0.01- 4.0 GHz 4 Electrical Specifications : T = 25C, V = 3 V, V = 0 V, Z = 50 A HIGH LOW 0 Parameter Test Conditions Units Min. Typ. Max. 1.0 GHz 0.65 2.0 GHz 0.70 0.95 Insertion Loss dB 3.0 GHz 0.85 4.0 GHz 1.10 1.0 GHz 62 2.0 GHz 62 65 Isolation dB 3.0 GHz 50 4.0 GHz 45 Return Loss 0.5 - 4.0 GHz dB 20 Input IP 2-Tone, 2.1 GHz, 10 MHz spacing dBm 53 3 2.1 GHz, V = 3 V 25 HIGH P1dB dBm 2.1 GHz, V = 5 V 30 HIGH 2.1 GHz, V = 3 V 20 HIGH P0.1dB dBm 2.1 GHz, V = 5 V 25 HIGH T , T 10% to 90% RF & 90% to 10% RF ns 30 RISE FALL T , T 50% of V to 10% / 90% RF ns 52 ON OFF C Transients In-band mV 12 Control Current - A <1 5 4. External DC blocking capacitors are required on all RF ports (39 pF capacitors are recommended). 5,6 7,8,9 Absolute Maximum Ratings Truth Table Parameter Absolute Maximum V1 V2 RFC-RF1 RFC-RF2 Input Power, V = 3 V HIGH V V On Off 33 dBm HIGH LOW (0.5 - 3.0 GHz) V V Off On Operating Voltage 8 V LOW HIGH Operating Temperature -40C to +85C 7. V = 0 V 0.2 V, V = 1.8 V to +5 V, minimum V - LOW HIGH HIgh V = 1.8 V, maximum V - V = 8.0 V. LOw HIgh LOw 8. For use at low voltage, MACOM recommends connecting a Storage Temperature -65C to +150C 20K pull up resistor on pin 3 to a voltage equal to the most positive control voltage. 5. Exceeding any one or combination of these limits may cause 9. Negative control voltage may be used. The V in the table HIGH permanent damage to this device. would be the most positive (0 V) and the V would be the LOw 6. MACOM does not recommend sustained operation near these most negative (-3 V for example). survivability limits. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. For further information and support please visit: