MASW-009101 SPDT Default On High Isolation CATV Switch Rev. V3 5 3000 MHz Features Functional Schematic** 75 Terminations RF1 / RF2 N/C N/C RF1 GT1 Positive Voltage Control High Isolation: 90 dB 216 MHz 16 Low Insertion Loss: 1.4 dB 2200 MHz N/C N/C 1 Lead-Free 3 mm 16-Lead PQFN Package 75 Halogen-Free Green Mold Compound N/C V1 RoHS* Compliant and 260C Reflow Compatible RFC V2 75 Description N/C N/C The MASW-009101 is a single pole double throw (SPDT) switch in a lead-free 3 mm 16-lead PQFN package. It meets FCC 15.115 specification of 80 dB N/C N/C RF2 GT2 isolation between RF1 and RF2 at 216 MHz during powered and un-powered states. The default on ** Default On path shown un-powered state provides a low insertion loss path from RFC to RF1 while maintaining high isolation 3 between RF2 and RFC/RF1. Pin Configuration This device is ideally suited for applications where Pin No. Pin Name Description low control voltage, high isolation, small size and low 1 N/C No Connection cost are required. 2 N/C No Connection Typical applications are to replace mechanical 3 RFC RF Common Port relays in CATV and satellite systems. This part can 4 N/C No Connection be used in all 75 systems operating up to 3 GHz. 5 N/C No Connection The MASW-009101 is fabricated using a GaAs 6 N/C No Connection pHEMT process. The process features full 7 RF2 RF Port 2 passivation for performance and reliability. 8 GT2 RF Termination 9 N/C No Connection 1,2 Ordering Information 10 V2 Control Voltage 2 11 V1 Control Voltage 1 Part Number Package 12 N/C No Connection MASW-009101-TR3000 3000 piece reel 13 GT1 RF Termination MASW-009101-001SMB Sample Board 14 RF1 RF Port 1 1. Reference Application Note M513 for reel size information. 15 N/C No Connection 2. All sample boards include 5 loose parts. 16 N/C No Connection 3 17 PAD RF and DC Ground 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MASW-009101 SPDT Default On High Isolation CATV Switch Rev. V3 5 3000 MHz 4 Electrical Specifications: T = 25C, V = 0 V / 3 V, Z = 75 A C 0 Parameter Test Conditions Units Min. Typ. Max. 50 MHz 0.5 220 MHz 0.6 Insertion Loss RF1 to RFC dB 1000 MHz 0.8 2200 MHz 1.0 1.4 50 MHz 0.8 220 MHz 0.9 Insertion Loss RF2 to RFC dB 1000 MHz 1.2 2200 MHz 1.4 1.9 50 MHz 80 Isolation 220 MHz 70 dB RFC-RF1/RF2 1000 MHz 52 55 2200 MHz 47 50 50 MHz 95 Isolation 220 MHz 80 95 dB RF1-RF2 1000 MHz 60 70 2200 MHz 47 50 50 MHz 25 220 MHz 20 Return Loss dB 1000 MHz 15 2200 MHz 13 Input P1dB (RF1/RF2) 1000 MHz dBm 28/18 IIP3 (RF1/RF2) 2 tone, 5 dBm/tone, 6MHz spacing, 1000 MHz dBm 40/37 IIP2 (RF1/RF2) 2 tone, 5 dBm/tone, 6MHz spacing, 1000 MHz dBm 58/53 CSO (RF1/RF2) 132 channels, 18 dBmV / channel in dBc -80/-70 CTB (RF1/RF2) 132 channels, 18 dBmV / channel in dBc -85/-85 Trise, Tfall 10% to 90% RF, 90% to 10% RF ns 16 Ton, Toff 50% control to 90% RF, 50% control to 10% RF ns 120 Transients In Band mV 80 Control Current V = 3.0 V A 500 600 C 4 Electrical Specifications: T = 25C, Z = 75 , Unpowered Operation A 0 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss RF1 to RFC 2200 MHz dB 1.4 50 MHz 90 Isolation 220 MHz 90 dB RF1-RF2 1000 MHz 60 70 2200 MHz 47 50 CSO / CTB 132 channels, 18 dBmV / channel in dBc -80/-80 4. External 0.1 F DC blocking capacitors are required on all RF In/Out and RF ground ports. See Application Schematic. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: