MASWCC0006 GaAs SP6T Switch, Absorptive, Single Supply Rev. V4 DC - 4.0 GHz Features 1,2,3,4 Pin Configuration Operates DC - 4 GHz on Single Supply ASIC TTL / CMOS Driver Leadless 4 x 7 mm Chip Scale Plastic Package Pin No. Function Pin No. Function Low DC Power Consumption 1 CP2 19 GND 50 Ohm Nominal Impedance 2 V 20 NC EE Test Boards are Available Tape and Reel are Available 3 NC 21 GND Lead-Free CSP-2 Package 4 C6 22 RFC 100% Matte Tin Plating over Copper 5 C5 23 GND Halogen-Free Green Mold Compound 6 C4 24 GND 260C Reflow Compatible RoHS* Compliant Version of SW90-0004A 7 C3 25 RF4 8 C2 26 GND Description 9 C1 27 RF5 M/A-COM s MASWCC0006 is a SP6T absorptive 10 NC 28 GND pHEMT switch with integral TTL driver. This device 11 GND 29 RF6 is in an MLP plastic surface mount package. This switch offers excellent broadband performance and 12 NC 30 GND repeatability from DC to 4 GHz, while maintaining 13 GND 31 NC low DC power dissipation. The MASWCC0006 is 14 RF1 32 V ideally suited for wireless infrastructure applications. EE 15 GND 33 Vcc 16 RF2 34 NC 17 GND 35 Vcc 18 RF3 36 CP1 1. NC = No Connection 2. For single supply operation VEE is internally generated Ordering Information and must remain isolated from external power supplies. Generated noise is typical of switching DC-DC Converters. 3. Connections and external components shown in functional Part Number Package schematic are required. 0.1F Capacitors need to be lo- MASWCC0006 Bulk Packaging cated near pins 32 & 33. 4. The exposed pad centered on the package bottom must be MASWCC0006TR 1000 piece reel connected to RF and DC ground. (For MLF Packages) MASWCC0006-TB Sample Test Board Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MASWCC0006 GaAs SP6T Switch, Absorptive, Single Supply Rev. V4 DC - 4.0 GHz Electrical Specifications: T = 25C A Parameter Test Conditions Frequency Units Min. Typ. Max. Insertion Loss RFC-RF1, 2, 3, 4, 5, 6 DC - 3.0 GHz dB 2.1 3.0 - 4.0 GHz dB 2.4 Isolation DC - 4.0 GHz dB 25 VSWR On (RFC, RF1-RF6) DC - 4.0 GHz Ratio 2.0:1 Logic per Truth Table Off (RF1-RF6) DC - 4.0 GHz Ratio 2.0:1 Logic per Truth Table 1 dB Compression 50 MHz dBm 15 0.5 - 4.0 GHz dBm 27 Input IP Two-tone inputs up to +5 dBm 50 MHz dBm 30 3 0.5-4.0 GHz dBm 40 Switching Speed Ton (50% Control to 90% RF) ns 20 Toff (50% Control to 10% RF) ns 15 Trise (10% to 90% RF) ns 5 Tfall (90% to 10% RF) ns 2 Vcc V 4.5 5.0 5.5 V LOW-level input voltage V 0.0 0.8 IL V HIGH-level input voltage V 2.0 5.0 IH lin (Input Leakage Current) Vin = V or GND uA -1.0 1.0 CC 5,7 Icc Vcc min to max, Logic 0 or 1 mA 5 8 8 Icc Vcntrl = V or GND uA 250 400 CC (Quiescent Supply Current) 6 Turn-on Current For guaranteed start-up mA 125 Icc V = Max, Vcntrl = V - 2.1 V mA 1.0 CC CC (Additional Supply Current Per TTL Input Pin) Switching Noise Generated from 3.5 MHz dBm -93 DC-DC Converter with recommended capacitors Thermal Resistance jc C/W 15 5. During turn-on, the device requires an initial start up current (Icc) specified as Turn-on Current. Once operational, Icc will drop to the speci- fied levels. This is not applicable to dual supply operation. 6. The DC-DC converter is guaranteed to start in 100 s as long as the power supplies have the maximum turn-on current available for start- up. 7. For single supply operation 8. For dual supply operation Truth Table (Switch) Control Inputs Condition of Switch 0 is TTL Low, 1 is TTL High RF Common to Each RF Port C1 C2 C3 C4 C5 C6 RF1 RF2 RF3 RF4 RF5 RF6 1 0 0 0 0 0 On Off Off Off Off Off 0 1 0 0 0 0 Off On Off Off Off Off 0 0 1 0 0 0 Off Off On Off Off Off 0 0 0 1 0 0 Off Off Off On Off Off 0 0 0 0 1 0 Off Off Off Off On Off 0 0 0 0 0 1 Off Off Off Off Off On 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: