MASWCC0010 GaAs SP4T Switch, Absorptive, Single Supply Rev. V4 DC - 4.0 GHz Features 2, 3, 4 Operates DC - 4 GHz on Single Supply Pin Configuration ASIC TTL / CMOS Driver Leadless 4 x 7 mm Chip Scale Plastic Package Pin No. Function Pin No. Function Low DC Power Consumption 1 CP2 19 GND 50 Ohm Nominal Impedance 1 Test Boards are Available 2 Vee 20 NC Tape and Reel is Available 1 3 NC 21 GND Lead-Free CSP-2 Package 4 C4 22 RFC 100% Matte Tin Plating over Copper 5 C3 23 GND Halogen-Free Green Mold Compound 1 260C Reflow Compatible 6 C2 24 NC RoHS* Compliant Version of SW90-0003 7 C1 25 RF3 1 8 NC 26 GND Description 1 1 9 NC 27 NC M/A-COM s MASWCC0010 is a SP4T absorptive 1 10 NC 28 GND pHEMT switch with integral TTL driver. This device 1 is in an MLP plastic surface mount package. This 11 NC 29 RF4 switch offers excellent broadband performance and 1 12 NC 30 GND repeatability from DC to 4 GHz, while maintaining 1 13 GND 31 NC low DC power dissipation. The MASWCC0010 is ideally suited for wireless infrastructure applications. 14 RF1 32 Vee 15 GND 33 Vcc 1 1 16 NC 34 NC 17 GND 35 Vcc 18 RF2 36 CP1 Ordering Information 1. NC = No Connection 2. For single supply operation VEE is internally generated Part Number Package and must remain isolated from external power supplies. Generated noise is typical of switching DC-DC converters. MASWCC0010 Bulk Packaging 3. Connections and external components shown in functional schematic are required. 0.1F Capacitors need to be lo- MASWCC0010TR 1000 piece reel cated near pins 32 & 33. 4. The exposed pad centered on the package bottom must be MASWCC0010-TB Sample Test Board connected to RF and DC ground. (For PQFN Packages) Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MASWCC0010 GaAs SP4T Switch, Absorptive, Single Supply Rev. V4 DC - 4.0 GHz Electrical Specifications: T = 25C A Parameter Test Conditions Frequency Units Min. Typ. Max. Insertion Loss RFC-RF1, 2, 3, 4 DC - 4.0 GHz dB 2.3 Isolation DC - 4.0 GHz dB 38 VSWR On (RFC, RF1-RF4) DC - 4.0 GHz Ratio 2.0:1 Logic per Truth Table Off (RF1-RF4) DC - 4.0 GHz Ratio 2.0:1 Logic per Truth Table 1 dB Compression 50 MHz dBm +15 0.5 - 4.0 GHz dBm +27 Input IP Two-tone inputs up to +5 dBm 50 MHz dBm 30 3 0.5-4.0 GHz dBm 40 Switching Speed Ton (50% Control to 90% RF) ns 35 Toff (50% Control to 10% RF) ns 20 Trise (10% to 90% RF) ns 12 Tfall (90% to 10% RF) ns 2 Vcc V 4.5 5.0 5.5 V LOW-level input voltage V 0.0 0.8 IL V HIGH-level input voltage V 2.0 5.0 IH lin (Input Leakage Current) Vin = V or GND uA -1.0 1.0 CC 5,7 Icc Vcc min to max, Logic 0 or 1 mA 5 8 8 Icc Vcntrl = V or GND uA 250 400 CC (Quiescent Supply Current) 6 Turn-on Current For guaranteed start-up mA 125 Icc V = Max, Vcntrl = V - 2.1 V mA 1.0 CC CC (Additional Supply Current Per TTL Input Pin) Switching Noise Generated from 3.5 MHz dBm -93 DC-DC Converter with recommended capacitors Thermal Resistance jc C/W 15 5. During turn-on, the device requires an initial start up current (Icc) specified as Turn-on Current. Once operational, Icc will drop to the speci- fied levels. This is not applicable to dual supply operation. 6. The DC-DC converter is guaranteed to start in 100 s as long as the power supplies have the maximum turn-on current available for start-up. 7. For single supply operation 8. For dual supply operation 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: