MASWSS0093 GaAs Broadband SPDT Switch Rev. V2 DC - 6.0 GHz Features Functional Schematic UNII, Hiperlan, and 802.11a+b/g Applications RFC GND GND Broadband Performance: DC-6 GHz Low Insertion Loss: 0.9 dB at 6 GHz VC1 High Isolation: 28 dB Typical VC2 Fast Switching Speed: 0.5 m GaAs PHEMT High Power: 36 dBm P1dB RF1 RF2 Lead-Free 3 mm 12-lead PQFN Package 100% Matte Tin Plating over Copper GND GND Halogen-Free Green Mold Compound RoHS* Compliant and 260C Reflow Compatible GND GND GND Description Pin Configuration M/A-COMs MASWSS0093 is a broadband GaAs Pin No. Pin Name Description PHEMT MMIC SPDT switch in a low cost, lead-free 3 mm 12-lead PQFN package. The MASWSS0093 1 VC1 Control 1 is ideally suited for applications where very small 2 RF1 RF Port 1 size and low cost are required. 3 GND Ground The MASWSS0093, with its small size and low 4 GND Ground height, is ideal for 802.11a and 802.11b/g PC card 5 GND Ground and access point applications. 6 GND Ground The MASWSS0093 delivers high isolation, low 7 GND Ground insertion loss and high linearity up to 6 GHz. 8 RF2 RF Port 2 9 VC2 Control 2 The MASWSS0093 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process 10 GND Ground features full passivation for performance and 11 RFC RF Input reliability. 12 GND Ground 2 13 Paddle RF and DC Ground 1 Ordering Information 2. The exposed pad centered on the package bottom must be connected to RF and DC ground. Part Number Package 3,4 Absolute Maximum Ratings MASWSS0093 Bulk Packaging Parameter Absolute Maximum MASWSS0093TR 1000 piece reel Input Power 3 V Control +37 dBm Sample Test Board MASWSS0093SMB (Includes 5 Samples) Input Power 5 V Control +39 dBm Operating Voltage +8.5 volts 1. Reference Application Note M513 for reel size information. Operating Temperature -40 C to +85 C Storage Temperature -65 C to +150C 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MASWSS0093 GaAs Broadband SPDT Switch Rev. V2 DC - 6.0 GHz Electrical Specifications: T = 25C, Z = 50 , V = 0 V / 3 V, P = 0 dBm C A 0 IN Parameter Test Conditions Units Min. Typ. Max. 2.4 GHz dB 0.70 1.05 Insertion Loss 5.3 GHz dB 0.85 1.20 5.8 GHz dB 0.85 1.20 2.4 GHz dB 24 29 Isolation 5.3 GHz dB 23 28 5.8 GHz dB 21 26 Return Loss DC - 6.0 GHz dB 20 Two Tone, +15 dBm/Tone, 5 MHz Spacing, >50 MHz 2.4 GHz, V = 3.0 V dBm 98 C IP2 5.8 GHz, V = 3.0 V dBm 81 C 2.4 GHz, V = 5.0 V dBm 107 C 5.8 GHz, V = 5.0 V dBm 87 C Two Tone, +15 dBm/Tone, 5 MHz Spacing, >50 MHz 2.4 GHz, V = 3.0 V dBm 57 C IIP3 5.8 GHz, V = 3.0 V dBm 53 C 2.4 GHz, V = 5.0 V dBm 57 C 5.8 GHz, V = 5.0 V dBm 54 C 2.4 GHz dBm 40 Input P-1dB 5.3 GHz dBm 36 5.8 GHz dBm 37 2.4 GHz, P = +20 dBm dBm -72 IN 2nd Harmonic 5.8 GHz, P = +20 dBm dBm -69 IN 2.4 GHz, P = +20 dBm dBm -85 IN 3rd Harmonic 5.8 GHz, P = +20 dBm dBm -75 IN T-rise, T-fall 10% to 90% RF and 90% to 10% RF nS 55 Ton, Toff 50% control to 90% RF, and 50% control to 10% RF nS 80 Transients mV 14 Control Current V = 3 V A 15 25 C 6,7,8 Truth Table Handling Procedures Please observe the following precautions to avoid Control V1 Control V2 RFC RF1 RFCRF2 damage: 1 0 On Off 0 1 Off On Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive 5. For positive voltage control, external DC blocking capacitors are required on all RF ports. to electrostatic discharge (ESD) and can be 6. Differential voltage, V (state 1) - V (state 0), must be damaged by static electricity. Proper ESD control +2.7 V minimum and must not exceed +5 V. techniques should be used when handling these 7. 0 = 0 0.2 V, 1 = +2.9 V to +5 V. devices. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: