MASWSS0136 GaAs SPDT Switch Rev. V2 DC - 3.0 GHz Features Functional Schematic Low Insertion Loss: 0.4 dB 2.4 GHz Moderate Isolation: 27 dB 2.4 GHz C = 39 pF Low Power Consumption: 5 A +3.0 V Lead-Free SC-70 (SOT-363) Package V1 RFC V2 100% Matte Tin Plating over Copper Halogen-Free Green Mold Compound RoHS* Compliant and 260C Reflow Compatible Description M/A-COMs MASWSS0136 is a GaAs PHEMT MMIC SPDT switch in a lead-free SC-70 (SOT-363) surface mount plastic package. The MASWSS0136 is ideally suited for applications where very small GND RF1 RF2 size and low cost are required. Pin 1 Typical applications are transmit / receive (Tx / Rx) C = 39 pF C = 39 pF switching in linear systems such as WLAN 802.11b/ g. Other applications include 1.9 GHz and 2.4 GHz DECT and linear systems operating up to 3.0 GHz. Pin Configuration The MASWSS0136 is fabricated using a 0.5 micron Pin No. Pin Name Description gate length GaAs PHEMT process. The process 1 RF1 RF Port 1 features full passivation for performance and reliability. 2 GND Ground 3 RF2 RF Port 2 1 4 V2 Control 2 Ordering Information 5 RFC RF Input Part Number Package 6 V1 Control 1 MASWSS0136 Bulk packaging MASWSS0136TR-3000 3000 piece reel 2,3 Absolute Maximum Ratings MASWSS0136SMB Sample Board 1. Reference Application Note M513 for reel size information. Parameter Absolute Maximum Input Power (0.5 - 3.0 GHz) +30 dBm 3 V Control Voltage -8.5 V < Vc < +8.5 V Operating Temperature -40C to +85C Storage Temperature -65C to +150C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MASWSS0136 GaAs SPDT Switch Rev. V2 DC - 3.0 GHz 4 Electrical Specifications: T = 25C, V = 0 V / 3 V, Z = 50 A C 0 Parameter Test Conditions Units Min. Typ. Max. 1.0 GHz dB 0.3 5 Insertion Loss 2.4 GHz dB 0.4 0.5 1.0 GHz dB 24 Isolation 2.4 GHz dB 25 27 VSWR 0.05 - 3.0 GHz Ratio 1.2:1 Two Tone, +5 dBm / Tone, 5 MHz Spacing IP2 2.4 GHz dBm 80 Two Tone, +5 dBm / Tone, 5 MHz Spacing IP3 2.4 GHz dBm 48 2.5 GHz, OFDM, QAM-64,54Mbps, EVM=2.5% 3.0 V dBm 22.5 Linear Pout 3.3 V dBm 24.0 5.0 V dBm 28.5 P1dB dBm 28 Trise, Tfall 10% to 90% RF and 90% to 10% RF nS 35 Ton, Toff 50% control to 90% RF, 50% control to 10% RF nS 40 Transients mV 10 Current V = 3.0 V A 5 10 C 4. For positive voltage control, external DC blocking capacitors are required on all RF ports. 5. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz 1.0 GHz, 39 pF for 0.5 - 3.0 GHz. 6,7 Lead-Free SC-70 (SOT-363) Truth Table Control V1 Control V2 RFC-RF1 RFC-RF2 0 1 On Off 1 0 Off On 6. Differential voltage, V (state 1) - V (state 0), must be +2.3 V minimum and must not exceed 8.5 V. 7. 0 = 0 V 0.2 V, 1 = +2.5 V to 5.0 V Qualification Qualified to M/A-COM specification REL-201, Proc- ess Flow 2. Handling Procedures The following precautions should be observed to avoid damage: Static Sensitivity Reference Application Note M538 for lead-free solder reflow Gallium Arsenide Integrated Circuits are sensitive recommendations. to electrostatic discharge (ESD) and can be dam- Meets JEDEC moisture sensitivity level 1 requirements. aged by static electricity. Proper ESD control tech- niques should be used when handling these de- vices. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: