MASWSS0151 GaAs SPDT Switch Rev. V6 DC - 3 GHz Features Functional Schematic Low Insertion Loss: 0.65 dB 2.4 GHz Isolation: 24 dB 2.4 GHz Low Current Consumption: <10 A -3 V V1 V2 Lead-Free SOT-363 Plastic Package RFC 100% Matte Tin Plating over Copper Halogen-Free Green Mold Compound 260C Reflow Compatible RoHS* Compliant Version of the SW-438 Description The MASWSS0151 is a GaAs MMIC SPDT switch in a low cost, lead-free SC70 (SOT-363) surface mount plastic package. This switch is ideally suited for RF1 GND RF2 applications that include transmit / receive switching Pin 1 for Bluetooth and WLAN equipment. The MASWSS0151 can also be used in applications up to 500 mW in cellular, PCS, DCS1800, GSM, CDMA, and other analog and digital wireless Pin Configuration communications systems. Pin No. Function Description The MASWSS0151 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process 1 RF1 RF Input / Output features full passivation for performance and reliability. 2 GND RF Ground 3 RF2 RF Input / Output 1 4 V2 Control 2 Input Ordering Information 5 RFC RF Common Input Part Number Package 6 V1 Control 1 Input MASWSS0151 Bulk Packaging MASWSS0151TR-3000 3000 piece reel Sample Board MASWSS0151SMB (Includes 5 Samples) 1. Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MASWSS0151 GaAs SPDT Switch Rev. V6 DC - 3 GHz 2 Electrical Specifications : T = 25C, V = 0 V / -3 V, P = 0 dBm, Z = 50 A C IN 0 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss DC - 3.0 GHz dB 0.65 0.8 DC - 1.0 GHz 29 31 Isolation 1.0 - 2.0 GHz dB 25 2.0 - 3.0 GHz 21 DC - 1.5 GHz 22 Return Loss dB 1.5 - 3.0 GHz 20 P1dB 1 GHz dBm 31 IP2 2 Tone, 10 dBm / Tone, 900 MHz, 5 MHz Spacing dBm 81 IP3 2 Tone, 10 dBm / Tone, 900 MHz, 5 MHz Spacing dBm 55 2nd Harmonic 2.4 GHz, P = 20 dBm dBc -70 IN 3rd Harmonic 2.4 GHz, P = 20 dBm dBc -60 IN T , T 50% control to 90% RF, 50% control to 10% RF ns 20 ON OFF T , T 10% to 90% RF, 90% to 10% RF ns 10 RISE FALL Control Current A 5 10 2. For positive voltage control, external DC blocking capacitors are required on all RF ports. 3,4 5,6 Absolute Maximum Ratings Truth Table Parameter Absolute Maximum V1 V2 RFC-RF1 RFC-RF2 Input Power (1 GHz) 32 dBm 1 0 Off On Operating Voltage 8 Volts 0 1 On Off Operating Temperature -40C to +85C 5. Differential voltage, V (state 1) - V (state 0), must be +2.1 V minimum and must not exceed 5 V. Storage Temperature -65C to +150C 6. 0 = -5 V to 0 V, 1 = -2.9 V to 5 V. 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. MACOM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: