MAVR-000200 Series Low-Voltage / High Q Si Hyperabrupt Varactors Rev. V7 Features Configurations Surface Mount Packages (SOT-23, SC70 3LD, SOD-323, SC-79) Top View (SOT-23, SC70 3LD) High Q at Low Voltages High Capacitance Ratio at Low Voltages SPC Process for Superior C-V Repeatability Available as Single and Common Cathode Pairs Tape and Reel Packaging Designed for Commercial Wireless Applications RoHS* Compliant and 260C Reflow Compatible Description single common cathode The MAVR-000200 series are ion-implanted, hyperabrupt junction, silicon tuning varactors in SOT-23, SC70 3LD, SOD-323 and SC-79 surface mount packages. This series of varactors is designed for high Q and low voltage operation. Each Top View (SOD-323, SC-79) varactor type has a typical Q greater than 400 at -2 V. These diodes are offered with 100% matte Sn plating. The MAVR-000200 series tuning varactors are ideally suited for wide band tuning and low phase noise applications where the supply voltage is limited to 5 volts or less. These varactors have been specifically designed for use in wireless communications up to the 2.4 GHz band. Applications include VCOs and voltage tuned filters. Typical Device Selection by Frequency *Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAVR-000200 Series Low-Voltage / High Q Si Hyperabrupt Varactors Rev. V7 Electrical Specifications T = +25 C A Breakdown Voltage I = 10A, V = 12 V Minimum R b Reverse Leakage Current V =10V, I = 100 nA Maximum R R 1 Capacitance (C ) (pF) Capacitance Ratio Q Factor T f = 1 MHz f = 50 MHz f = 1 MHz, V = 2.0 V C 0.5 / C 4.0 R T T Base Part Number V = 4.0 V V = 2.0 V R R Min. Nom. Max. Max. Typ. Typ. MAVR-000230-XXXXXX 4.5 5.0 6.0 3.1 3.5 400 MAVR-000240-XXXXXX 3.0 3.5 4.2 2.3 3.5 450 MAVR-000250-XXXXXX 2.3 2.7 3.5 1.8 3.5 450 1. Capacitance 1 MHz 2,3 Absolute Maximum Ratings T =+25C (Unless Otherwise Noted) A Handling Procedures Please observe the following precautions to avoid Parameter Absolute Maximum damage: Reverse Voltage 12 V Static Sensitivity Forward Current 50 mA Silicon Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged Total Power Dissipation 250 mW by static electricity. Proper ESD control techniques should be used when handling these devices. Operating Temperature -55C to +125C Storage Temperature -55C to +125C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. MACOM does not recommend sustained operation near these survivability limits. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: