MAVR-044769-12790T MACOM

MA144769-287 & MAVR-044769-1279 Surface Mount Low Power Step Recovery Diodes Rev. V3 Features SOT-23 (Case Style 287) Surface Mount Packages (SOT-23,SC-79) Low Transition Times SPC Process for Superior C-V Repeatability Tape and Reel Packaging Designed for Commercial Wireless Applications RoHS Compliant Description The MA144769-287 and the MAVR-044769-1279 step recovery diodes are designed for use in low power multipliers with output frequencies of up to 5 GHz. These step recovery diodes generate harmonics by storing a charge as the diode is driven SC-79 (Case Style 1279) to forward conductance by the positive voltage of the input signal. When the signal reverses polarity, this charge is extracted. These diodes will appear as a low impedance current source until all the charge is extracted, then it will snap to a higher impedance. This causes a voltage pulse to form in the impulse circuit of the multiplier. Step recovery diodes make excellent high order multipliers such as comb generators. They are also useful as efficient moderate power x2 - x4 multipliers. These step recovery diodes are useful for surface mount low power applications. Electrical Specifications Nominal Nominal Nominal Total Capacitance Rev e rse Voltage Transition Carrier Input Output 1 MHz, 6 V 10 A Time Lifetime Frequency Frequency RoHS Compliant 1 Part Numbers (pF) (V) (ns) (ps) (GHz) Min. Max. Min. Typical Max. MA144769-287T 0.8 1.2 30 20 - 50 150 0.1 - 1.0 1 - 5 MAVR-044769-12790T 1. The prefix defines package style, configuration and packaging information. Contact representative for complete part identification. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MA144769-287 & MAVR-044769-1279 Surface Mount Low Power Step Recovery Diodes Rev. V3 2,3 Absolute Maximum Ratings Capacitance vs. Bias, 1 MHz T = +25C (Unless Otherwise Noted) A 5 Parameter Absolute Maximum 4 Operating Temperature -65C to +125C Storage Temperature -65C to +125C 3 Reverse Voltage 30 V 2 Forward Bias Current 50 mA 1 Power Dissipation 250 mW 2. Operation of this device above any one of these parameters 0 may cause permanent damage. 0 5 10 15 20 25 30 3. Please refer to application note M538 for surface mounting instructions. Bias (V) Mounting Information The illustration indicates the recommended mounting pad configuration for the SOT-23 and SC-79 packages. Permanent attachment is performed by a reflow soldering procedure during which the tab temperature does not exceed +275C and the body temperature does not exceed +260C. Please refer to Application Note M538 for surface mounting instructions. SOT-23 SC-79 .030 min. 0.80 0.020 0.50 .090 2.2 .035 min. 0.90 0.020 .037 0.053 0.95 0.50 1.35 0.75 inches Dimenstions: 1.9 mm inches Dimenstions: mm 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: