SW-475 SPDT High Isolation Terminated Switch Rev. V7 0.5 - 3.0 GHz Functional Schematic Features Positive Voltage Control (0 / +5 V) High Isolation: 54 dB 0.9 GHz 16 15 14 13 52 dB 1.9 GHz 50-Ohm Internal Terminations Low Insertion Loss: 0.6 dB 0.9 GHz RF2 RF1 0.7 dB 1.9 GHz 1 12 4 mm 16-Lead PQFN Package 2 11 Description The SW-475 GaAs monolithic switch provides high 3 10 isolation in a low-cost, plastic surface mount package. The SW-475 is ideal for applications 4 9 across a broad range of frequencies including synthesizer switching, transmit / receive switching, V1 switch matrices and filter banks in systems such as V2 radio and cellular equipment, PCS, GPS, and fiber optic modules. 56 7 8 The SW-475 is fabricated using M/A-COM Technology Solutions 1.0-micron gate length PIN Configuration MESFET process. The process features full chip passivation for performance and reliability. Pin Function Description 1 RF2 RF port 2 GND RF ground 1 Ordering Information 3 GND RF ground Part Number Package 4 V1 Control 1 5 V2 Control 2 SW-475 PIN Bulk Packaging 6 GND RF ground SW-475TR 1000 piece reel 7 RFC RF port SW-475TR-3000 3000 piece reel 8 GND RF ground SW-475SMB Sample board 9 GND RF ground 10 GND RF ground 1. Reference Application Note M513 for reel size information. 11 GND RF ground 12 RF1 RF port 13 GND RF ground 14 GND RF ground 15 GND RF ground 16 GND RF ground 2 17 (pad) GND RF ground 2. The exposed pad centered on the package bottom must be connected to RF and DC ground. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, India Tel: +91.80.43537383 China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. RFCSW-475 SPDT High Isolation Terminated Switch Rev. V7 0.5 - 3.0 GHz 3 Electrical Specifications : T = 25 C, V = 0, 5.0 V (unless otherwise specified) A CTL Parameter Test Conditions Units Min. Typ. Max. 0.5- 1 GHz 0.6 0.7 Insertion Loss 1.0 - 2.0 GHz dB 0.7 0.8 2.0 - 3.0 GHz 0.75 0.9 0.5 - 1 GHz 51 54 Isolation 1.0 - 2.0 GHz dB 48 52 2.0 - 3.0 GHz 45 50 0.5 - 1 GHz 15 20 Return Loss 1.0 - 2.0 GHz dB 15 20 2.0 - 3.0 GHz 15 20 Input IP2 2-Tone 900 MHz, 5 MHz spacing (V = 5.0 V) dBm 83 C Input IP3 2-Tone 900 MHz, 5 MHz spacing (V = 5.0 V) dBm 46 C 1 GHz, 5 V 27 P1dB dBm 1 GHz, 3 V 18 1 GHz, 5 V 24 P0.1dB dBm 1 GHz, 3 V 11 T , T L 10% to 90% RF & 90% to 10% RF ns 24 RISE FAL T , T 50% of V to 10 % / 90% RF ns 15 ON OFF C Transients V = 5.0 V square wave, in-band mV 12 C Control Current V = 4.5 V, 0 dBm A 2 13 C 3. DC blocking capacitors requires on all RF ports. 4,5 6 Absolute Maximum Ratings Truth Table V1 V2 RFC - RF1 RFC - RF2 Parameter Absolute Maximum 0 1 ON OFF Input Power (0.5 - 3.0 GHz) 3 V Control +30 dBm 1 0 OFF ON 5 V Control +33 dBm 6. External DC blocking capacitors required on all RF ports. Operating Voltage +8.5 volts We recommend 47 pF. Operating Temperature -40C to +85C Logic Level Voltage Level 0 0 V 0.2 V Storage Temperature -65C to +150C 4. Exceeding any one or combination of these limits may cause 1 3.0 V to 8.0 V permanent damage to this device. 5. M/A-COM does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, India Tel: +91.80.43537383 China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.