20~25W AC-DC Single Output Wall-mounted type G S25E s e ri e s Features : Universal AC input / Full range No load power consumption<0.3W ErP step2 compliant Meet EISA 2007 (Energy Independence and Security Act) 2 pole EURO plug Class power (without earth pin) Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case LED indicator for power on Approvals: TUV / CB / CE Pass LPS 2 years warranty SPECIFICATION ORDER NO. GS25E05-P1J GS25E07-P1J GS25E09-P1J GS25E12-P1J GS25E15-P1J GS25E18-P1J GS25E24-P1J GS25E28-P1J GS25E48-P1J SAFETY MODEL NO. GS25E05 GS25E07 GS25E09 GS25E12 GS25E15 GS25E18 GS25E24 GS25E28 GS25E48 DC VOLTAGE Note.2 5V 7.5V 9V 12V 15V 18V 24V 28V 48V RATED CURRENT 4.0A 2.93A 2.77A 2.08A 1.66A 1.38A 1.04A 0.89A 0.52A CURRENT RANGE 0 ~ 4.0A 0 ~ 2.93A 0 ~ 2.77A 0 ~ 2.08A 0 ~ 1.66A 0 ~ 1.38A 0 ~ 1.04A 0 ~ 0.89A 0 ~ 0.52A RATED POWER (max.) 20W 22W 25W 25W 25W 25W 25W 25W 25W OUTPUT RIPPLE & NOISE (max.) Note.3 50mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p VOLTAGE TOLERANCE Note.4 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.6 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% SETUP, RISE, HOLD UP TIME 500ms, 20ms, 50ms/230VAC 500ms, 20ms, 15ms/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 78.5% 81.5% 82.5% 84.5% 84.5% 84.5% 85.5% 85.5% 87% INPUT AC CURRENT 0.7A / 100VAC INRUSH CURRENT (max.) 45A / 230VAC LEAKAGE CURRENT(max.) 0.25mA / 240VAC 110 ~ 150% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 105 ~ 135% rated output voltage OVER VOLTAGE Protection type : Clamp by zener diode WORKING TEMP. 0 ~ +50 (Refer toDerating Curv) 20% ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03% / (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:4242VDC SAFETY & I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH ISOLATION RESISTANCE EMC (Note. 7) EMC EMISSION Compliance to EN55022, EN61000-3-2,3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A MTBF 500Khrs min. MIL-HDBK-217F(25 ) DIMENSION 79*54*33mm (L*W*H) OTHERS 210g 60pcs / 13.5kg / CARTON PACKING PLUG See page2 CONNECTOR CABLE See page2 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. NOTE 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12 twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load 7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. File Name:GS25E-SPEC 2011-06-1420~25W AC-DC Single Output Wall-mounted type G S25E s e ri e s Mechanical Specification Unit:mm UL1185 16AWG 1230 50mm for 5V~12V UL1185 18AWG 1830 50mm for 15V~48V 70 10mm POWER LED 11 0.5mm ID 2.1 x OD 5.5 NAME PLATE Plug Assignment 33 79 Standard plug: P1J P1J P/N OUTPUT CENTER + Derating Curve Static Characteristics 100 100 80 70 60 0 10 20 30 40 50 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:GS25E-SPEC 2011-06-14 LOAD (%) 54 38 LOAD (%)