304W Triple Output for Video Game M WP-610P Features : 230VAC input only Built-in passive PFC, PF>0.7 Economical video game power Power ON-OFF switch Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC fan 100% full load burn-in test 2 years warranty SPECIFICATION MODEL NO. MWP-610P CHANNEL CH1 CH2 CH3 DC VOLTAGE 5V 12V 24V MINIMUM CURRENT 1.5A 1A 0.5A RATED CURRENT (CONTINUOUS) 8A 8A 4.5A PEAK CURRENT (10 min.) 8A 12A 5A RATED POWER (CONTINUOUS) 244W OUTPUT PEAK POWER (10 min.) 304W RIPPLE & NOISE (max.) Note.2 80mVp-p 150mVp-p 200mVp-p VOLTAGE TOLERANCE 5.0% 5.0% 5.0% LINE REGULATION 1.0% 1.0% 1.0% LOAD REGULATION Note.3 5.0% 5.0% 5.0% HOLD UP TIME 12ms min. at full load AC RECEPTACLE RATED (max.) 1A / 230VAC VOLTAGE RANGE 200 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.7 / 230VAC INPUT EFFICIENCY (Typ.) 76% AC CURRENT 4.5A / 230VAC INRUSH CURRENT (max.) 80A / 230VAC 3.5mA / 240VAC LEAKAGE CURRENT(max.) 105 ~ 200% rated output power OVERLOAD Protection type : Shut down o/p voltage, re-power on to recover PROTECTION 105 ~ 140% rated output voltage OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE WORKING TEMP. -10 ~ +50 (Refer to output load derating curve) WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.05% / ( 0 ~ 50 VIBRATION 10 ~ 200Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS Design refer to EN60950-1 WITHSTAND VOLTAGE I/P-O/P, I/P-FG:1.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG:50M Ohms / 500VDC / 25 / 70% RH EMC EMI CONDUCTION & RADIATION Compliance to EN55022 Class B (Note 4) HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A CONNECTOR See page 2 OTHERS COOLING Forced air ventilation by 8cm DC fan DIMENSION 150*140*86mm (L*W*H) NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Load regulation is measured from 20% to 100% max. Load. 4. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. File Name: MWP-610P-SPEC 2010-04-28OUTPUT WIRES 138 6 52.4 118.5 120 150 304W Triple Output for Video Game M WP-610P Mechanical Specification Unit: mm 86 80 140 42.55 16 29.5 61.8 69.9 350 50 25 PIN12 PIN4 PIN9 PIN1 Pin No. Assignment :JST ELR-12V or equivalent Pin No. Assignment Pin No. Assignment Pin No. Assignment 1 +12V 5 +12V 9 +12V 2 GND 6 GND 10 GND 3 +24V 7 +24V 11 GND 4 +5V 8 +5V 12 +5V Derating Curve Static Characteristics Ta=25 100 100 90 80 80 70 60 60 40 50 20 40 -10 0 10 20 30 35 40 50 60 (HORIZONTAL) 200 210 220 230 240 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name: MWP-610P-SPEC 2010-04-28 LOAD (%) LOAD (%)