2N6350 and 2N6351 Qualified Levels: JAN, JANTX, and NPN Darlington Power Silicon Transistor Available on JANTXV commercial Qualified per MIL-PRF-19500/472 versions DESCRIPTION This high speed NPN transistor is military qualified up to the JANTXV level. This TO-33 leaded top-hat has three isolated terminals with terminal four, the collector terminal, tied to the case. Important: For the latest information, visit our website 2N6350 and 2N6351 MECHANICAL and PACKAGING CASE: Hermetically sealed, kovar base, nickel cap. TERMINALS: Solder dip (Sn63/Pb37), RoHS compliant matte-tin plating available on commercial grade only. MARKING: Part number, date code, manufacturers ID and serial number WEIGHT: Approximately 1.2 grams See package dimensions on last page. PART NOMENCLATURE JAN 2N6350 (e3) Reliability Level RoHS Compliance JAN = JAN Level e3 = RoHS Compliant (available JANTX = JANTX Level on commercial grade only) JANTXV = JANTXV Level Blank = non-RoHS Compliant Blank = Commercial JEDEC type number (see Electrical Characteristics table) SYMBOLS & DEFINITIONS Symbol Definition Base current: The value of the dc current into the base terminal. I B Collector current: The value of the dc current into the collector terminal. I C I Emitter current: The value of the dc current into the emitter terminal. E T Case temperature: The temperature measured at a specified location on the case of a device. C V Collector-base voltage: The dc voltage between the collector and the base. CB Collector-base voltage, base open: The voltage between the collector and base terminals when the emitter terminal is V CBO open-circuited. Collector-supply voltage: The supply voltage applied to a circuit connected to the collector. V CC Collector-emitter voltage, base open: The voltage between the collector and the emitter terminals when the base V CEO terminal is open-circuited. Collector-emitter voltage: The dc voltage between the collector and the emitter. V CE Emitter-base voltage: The dc voltage between the emitter and the base. V EB Emitter-base voltage, collector open: The voltage between the emitter and base terminals with the collector terminal V EBO open-circuited. T4-LDS-0314, Rev. 1 (11/20/13) 2013 Microsemi Corporation Page 2 of 8