LAN9500/LAN9500i LAN9500A/LAN9500Ai USB 2.0 to 10/100 Ethernet Controller Data Brief PRODUCT FEATURES Automatic 32-bit CRC generation and checking Highlights Automatic payload padding and pad removal Single Chip Hi-Speed USB 2.0 to 10/100 Ethernet Loop-back modes Controller TCP/UDP/IP/ICMP checksum offload support Integrated 10/100 Ethernet MAC with Full-Duplex Flexible address filtering modes Support One 48-bit perfect address 64 hash-filtered multicast addresses Integrated 10/100 Ethernet PHY with HP Auto-MDIX Pass all multicast support Promiscuous mode Integrated USB 2.0 Hi-Speed Device Controller Inverse filtering Integrated USB 2.0 Hi-Speed PHY Pass all incoming with status report Wakeup packet support Implements Reduced Power Operating Modes Integrated Ethernet PHY 8kV HBM ESD protection (component level) Auto-negotiation 8kV contact-discharge, 15kV air discharge Automatic polarity detection and correction ESD protection per IEC61000-4-2 HP Auto-MDIX support Link status change wake-up detection Target Applications Support for 3 status LEDs Embedded Systems External MII and Turbo MII support HomePNA and HomePlug PHY Set-Top Boxes Power and I/Os PVRs Various low power modes CE Devices 1 NetDetach feature increases battery life 1 Networked Printers Supports PCI-like PME wake 11 GPIOs USB Port Replicators Supports bus-powered and self-powered operation Standalone USB to Ethernet Dongles Integrated power-on reset circuit Test Instrumentation Single external 3.3v I/O supply Industrial Internal core regulator Miscellaneous Features Key Features EEPROM Controller USB Device Controller 1 Supports custom operation without EEPROM Fully compliant with Hi-Speed Universal Serial Bus IEEE 1149.1 (JTAG) Boundary Scan Specification Revision 2.0 Requires single 25 MHz crystal Supports HS (480 Mbps) and FS (12 Mbps) modes Software Four endpoints supported Windows XP/Vista Driver Supports vendor specific commands Linux Driver Integrated USB 2.0 PHY Win CE Driver Remote wakeup supported MAC OS Driver High-Performance 10/100 Ethernet Controller EEPROM Utility Fully compliant with IEEE802.3/802.3u Packaging Integrated Ethernet MAC and PHY 56-pin QFN (8x8 mm) Lead-Free RoHS Compliant 10BASE-T and 100BASE-TX support Full- and half-duplex support Environmental Full- and half-duplex flow control Commercial Temperature Range (0C to +70C) Preamble generation and removal Industrial Temperature Range (-40C to +85C) 1 = LAN9500A/LAN9500Ai only SMSC LAN950x Family Revision 1.1 (04-18-13) PRODUCT PREVIEWUSB 2.0 to 10/100 Ethernet Controller Order Numbers: LAN9500-ABZJ (Tray) for 56-pin, QFN lead-free RoHS compliant package (0 to +70C temp range) LAN9500-ABZJ-TR (Tape & Reel) for 56-pin, QFN lead-free RoHS compliant package (0 to +70C temp range) LAN9500i-ABZJ (Tray) for 56-pin, QFN lead-free RoHS compliant package (-40 to +85C temp range) LAN9500i-ABZJ-TR (Tape & Reel) for 56-pin, QFN lead-free RoHS compliant package (-40 to +85C temp range) LAN9500A-ABZJ (Tray) for 56-pin, QFN lead-free RoHS compliant package (0 to +70C temp range) LAN9500A-ABZJ-TR (Tape & Reel) for 56-pin, QFN lead-free RoHS compliant package (0 to +70C temp range) LAN9500Ai-ABZJ (Tray) for 56-pin, QFN lead-free RoHS compliant package (-40 to +85C temp range) LAN9500Ai-ABZJ-TR (Tape & Reel) for 56-pin, QFN lead-free RoHS compliant package (-40 to +85C temp range) This product meets the halogen maximum concentration values per IEC61249-2-21 For RoHS compliance and environmental information, please visit www.smsc.com/rohs Copyright 2013 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC s standard Terms of Sale Agreement dated before the date of your order (theTerms of Sale Agreemen). The product may contain design defects or errors known as anomalies which may cause the product s functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at