TPP5XGFLRC000E2A Molex

1310nm 10km SFP+ Transceivers TPP5XGFLRx000E2A Product Description The TPP5XGFLRx000E2A is an enhanced small form factor pluggable (SFP+) fiber optic transceiver with digital diagnostics monitoring functionality (DDM). Compliance with Ethernet standard makes it ideally suited for 10Gbps data-com applications. DDM functionality (alarm and warning 2 features) is integrated into the design via an I C serial interface per the Multi- Source Agreement (MSA) SFF-8472, Rev. 10.4. The transceiver supports data rates from 11.3Gbps down to 8Gbps. It provides an excellent solution for data transmission at 1310nm over up to 10km single mode fiber. The sub-watt power consumption and excellent EMI performance allow system design with high port density. The product is RoHS compliant and is designed and tested in accordance with industry safety standards. The transceiver is Class 1 Laser product per U.S. FDA/CDRH and international IEC-60825 standards. The TPP5XGFLRx000E2A transceiver connects to standard 20-pad SFP+ Features connectors for hot plug capability. This allows the system designer to make Transmission distance up to 10km (SM fiber) configuration changes or maintenance by simply plugging in different transceivers without removing the power supply from the host system. The Low power consumption transmitter and receiver DATA interfaces are internally AC-coupled. LV-TTL Wide case operating temperature range Transmitter Disable control input and Loss of Signal (LOS) output interfaces Compliant to SFP+ Electrical MSA SFF-8431 are also provided. Compliant to SFP+ Mechanical MSA SFF-8432 The transceiver has bail-type latch, which offers an easy and convenient way to release the modules. The latch is compliant with the SFP MSA. Compliant to 10GBASE-L specifications Digital Diagnostics Monitoring (DDM) through The transceiver operates from a single +3.3V power supply over a case Serial Interface compliant with SFF-8472, Rev. operating temperature range of -5C to +70C (Commercial), or -5C to 10.4 +85C (Extended) or -40C to +85C (Industrial). The housing is made of RoHS 6/6 Compliant metal for EMI immunity. Laser Class 1 IEC/CDRH Compliant Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Storage Temperature Range T - 40 + 85 C ST Commercial - 5 + 70 1 Case Operating Temperature Extended T - 5 + 85 C OP Industrial - 40 + 85 2 Operating Relative Humidity RH 0 85 % Supply Voltage Range V - 0.5 + 3.6 V CC 1 Measured on top side of SFP+ module at the front center vent hole of the cage. 2 Non condensing S0514 Rev.01. (web) 2016-01-08TPP5XGFLRx000E2A Transmitter Performance Characteristics (Over Operating Case Temperature. V = 3.13 to 3.47V) CC Parameter Symbol Minimum Typical Maximum Units Data Rate B - 10.3125 - Gb/s Center Wavelength 1260 1310 1355 nm C 20 Spectral Width - - 1.0 nm 1 Average Optical Output Power PAvg - 8.2 - + 0.5 dBm Optical Modulation Amplitude POMA - 5.2 - - dBm Extinction Ratio ER 3.5 - - dB RIN Relative Intensity Noise - - - 128 dB/Hz Side Mode Suppression Ratio SMSR 30 - - dB Optical Return Loss Tolerance - - - - 12 dB Transmitter and Dispersion Penalty 10.3125Gb/s TDP - - 3.2 dB P OFF Average Launch Power of OFF transmitter - - - 30 dB Optical Output Eye Compliant with IEEE 802.3ae 1 Average power figures are informative only, per IEEE 802.3ae Receiver Performance Characteristics (Over Operating Case Temperature. V = 3.13 to 3.47V) CC Parameter Symbol Minimum Typical Maximum Units Data Rate B - 10.3125 - Gb/s Wavelength of Operation 1260 - 1355 nm 1 P 10.3125 Gb/s - - - 14.4 avg Receiver Sensitivity P dBm min 1 - OMA 10.3125 Gb/s - - 12.6 Stressed Receiver Sensitivity in OMA - - - - 10.3 dBm 2 ( 10.3125Gb/s) Maximum Input Power Pmax + 0.5 - - dBm Receiver Reflectance - - - - 12 dB LOS Hysteresis - 0.5 - - dB Increasing Light Input Plos+ - 30 - - LOS Thresholds dBm Decreasing Light Input Plos- - - - 16 1 -12 31 Specified with BER <1x10 and PRBS 2 -1. 2 Comply with IEEE 802.3ae Note: The specified characteristics are met within the recommended range of operation. Unless otherwise noted typical data are quoted at nominal voltage and +25C ambient temperature. Laser Safety: All transceivers are Class 1 Laser products per FDA/CDRH Oplink Communications, LLC. and IEC-60825 standards. They must be operated under DATE OF MANUFACTURE: specified operating conditions. This product complies with 21 CFR 1040.10 and 1040.11 Meets Class 1 Laser Safety Requirements S0514 Rev.01. (web) 2016-01-08 Oplink Communications, LLC 2