TPP7XGJERC000E2G Molex

1550nm 40km SFP+ Transceivers TPP7XGJERxG Pb Product Description The TPP7XGJERxG is an enhanced small form factor pluggable (SFP+) fiber optic transceiver with digital diagnostics monitoring functionality (DDM). Supporting Ethernet and Fiber Channel standards makes it ideally suited for 10Gbps data-com and storage area network applications. DDM functionality 2 (alarm and warning features) is integrated into the design via an I C serial interface per the Multi-Source Agreement (MSA) SFF-8472, Rev. 11.3. The transceiver supports data rates ranging from 11.3Gbps down to 8Gbps. It provides an excellent solution for data transmission at 1550nm over up to 40km single mode fiber. The low power consumption and excellent EMI performance enable system design with high port density. The product is RoHS compliant and is designed and tested in accordance with industry safety standards. The transceiver is Class 1 Laser product per U.S. FDA/CDRH and international IEC-60825 standards. The TPP7XGJERxG transceiver connects to standard 20-pad SFP+ connectors Features for hot plug capability. This allows the system designer to make configuration Multi-rate for Ethernet & Fiber Channel changes or maintenance by simply plugging in different transceivers without Transmission distance up to 40km (SM fiber) removing the power supply from the host system. The transmitter and receiver Low power consumption DATA interfaces are internally AC-coupled. LV-TTL Transmitter Disable control Wide case operating temperature range input and Loss of Signal (LOS) output interfaces are also provided. Compliant with SFP+ Electrical MSA SFF-8431 The transceiver has bail-type latch, which offers an easy and convenient way Compliant with SFP+ Mechanical MSA SFF-8432 to release the modules. The latch is compliant with the SFP MSA. Compliant with 10GBASE-E specifications The transceiver operates from a single +3.3V power supply over an operating Digital Diagnostics Monitoring (DDM) through case temperature range of -5C to +70C (commercial), or -5C to +85C Serial Interface comply with SFF-8472, Rev. 11.3 (extended) or -40C to +85C (industrial) . The housing is made of metal for RoHS 6/6 Compliant EMI immunity. Laser Class 1 IEC/CDRH compliant Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Storage Temperature Range T - 40 + 85 C ST Commercial - 5 + 70 1 Operating Case Temperature Extended T - 5 + 85 C OP Industrial - 40 + 85 2 Operating Relative Humidity RH 0 85 % V Supply Voltage Range - 0.5 + 3.6 V CC 1 Measured on top side of SFP+ module at the front center vent hole of the cage. 2 Non condensing S0510. Rev.01 (web) 2015-08-21TPP7XGJERxG Transmitter Performance Characteristics (Over Operating Case Temperature. V = 3.13 to 3.47V) CC Parameter Symbol Minimum Typical Maximum Units Data Rate B - 10.3125 - Gb/s Center Wavelength 1530 - 1565 nm C 1 PAvg Average Optical Output Power - 4.7 - + 4 dBm Optical Modulation Amplitude POMA - 1.7 - - dBm Extinction Ratio ER 3 - - dB Relative Intensity Noise in OMA RIN OMA - - - 128 dB/Hz 21 SMSR Side Mode Suppression Ratio 30 - - dB Optical Return Loss Tolerance - - - - 21 dB Transmitter and Dispersion Penalty 10.3125Gb/s TDP - - 3 dB Optical Output Eye Compliant with IEEE 802.3ae 1 Average power figures are informative only, per IEEE 802.3ae. (Over Operating Case Temperature. V = 3.13 to 3.47V) Receiver Performance Characteristics CC Parameter Symbol Minimum Typical Maximum Units Data Rate B - 10.3125 - Gb/s Wavelength of Operation 1530 - 1565 nm 1 P Receiver Sensitivity OMA 10.3125Gb/s min - - - 14.1 dBm Stressed Receiver Sensitivity in OMA - - - - 11.3 dBm 2 ( 10.3125Gb/s) -12 Maximum Input Power (10 BER) Pmax - 1 - - dBm Receiver Reflectance - - - - 26 dB LOS Hysteresis - 0.5 - - dB Increasing Light Input Plos+ - - - 16 LOS Thresholds dBm Decreasing Light Input Plos- - 30 - - 1 -12 31 Specified with BER <1x10 and PRBS 2 -1. 2 Comply with IEEE 802.3ae Note: The specified characteristics are met within the recommended range of operation. Unless otherwise noted typical data are quoted at nominal voltage and +25C ambient temperature. Laser Safety: All transceivers are Class 1 Laser products per FDA/CDRH and IEC-60825 standards. They must be operated under specified Oplink Communications, LLC. operating conditions. This product complies with 21 CFR 1040.10 and 1040.11 Meets Class 1 Laser Safety Requirements S0510. Rev.01 (web) 2015-08-21 Oplink Communications, LLC 2