SF2259H RF SAW Filter, 921.5 MHz, 13 MHz Bandwidth 2.0 x 1.6 x 0.9 mm Surface-mount Case Pb Input/Output Impedance 50/50 921.5 MHz Complies with Directive 2002/95/EC (RoHS) Complies with AEC-Q200 Qualification Testing SAW Filter Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +15 dBm Maximum DC Voltage on any Non-ground Terminal 3 VDC Operating Temperature Range -40 to +85 C Storage Temperature Range in Tape and Reel -40 to +85 C Maximum Soldering Profile, 5 Cycles 265 C for 10 s SM2016-4 Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Center Frequency f 921.5 MHz C 2.0 3.0 Maximum Insertion Loss, 915 - 928 MHz IL MAX Amplitude Ripple, p-p, 915 - 928 MHz 0.3 1.0 dB Return Loss, 915 - 928 MHz 10 12 Group Delay Ripple, 915 - 928 MHz 15 50 ns Attenuation, Referenced to 0 dB: 10 to 857.5 MHz 40 52 857.5 to 895 MHz 22 45 dB 970 to 1005 MHz 35 40 1005 to 1110 MHz 40 56 1110 to 3000 MHz 30 39 Terminating Source impedance Z 50 S Terminating Load impedance Z 50 L Single Ended Input / Output, Impedance match No matching network required for operation at 50 ohms Case Style SM2016-4 Lid Symbolization 3W CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. US and international patents may apply. 2. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd. Copyright Murata Manufacturing Co., Ltd. All rights reserved. Apr 2016 SF2259H (R) 1/15/18 Page 1 of 5 www.murata.comMatching Circuit SF2259H Frequency Response Plots Copyright Murata Manufacturing Co., Ltd. All rights reserved. Apr 2016 www.murata.com SF2259H (R) 1/15/18 Page 2 of 5