74AHCT377PW,112 NXP

74AHC377 74AHCT377 Octal D-type ip-op with data enable positive-edge trigger Rev. 02 12 June 2008 Product data sheet 1. General description The 74AHC377 74AHCT377 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). It is specied in compliance with JEDEC standard No. 7-A. The 74AHC377 74AHCT377 has eight edge-triggered, D-type ip-ops with individual D inputs and Q outputs. A common clock input (CP) loads all ip-ops simultaneously when the data enable input (E) is LOW. The state of each D input, one set-up time before the LOW-to-HIGH clock transition, is transferred to the corresponding output (Qn) of the ip-op. The E input is only required to be stable one set-up time prior to the LOW-to-HIGH transition for predictable operation. For versions associated with the 74AHC377 74AHCT377, refer to the following: For the master reset version, see 74AHC273 74AHCT273 For the transparent latch version, see 74AHC373 74AHCT373 For the 3-state version, see 74AHC374 74AHCT374 2. Features n Balanced propagation delays n All inputs have Schmitt-trigger actions n Inputs accept voltages higher than V CC n Ideal for addressable register applications n Data enable for address and data synchronization n Eight positive-edge triggered D-type ip-ops n Input levels: u For 74AHC377: CMOS level u For 74AHCT377: TTL level n ESD protection: u HBM EIA/JESD22-A114E exceeds 2000 V u MM EIA/JESD22-A115-A exceeds 200 V u CDM EIA/JESD22-C101C exceeds 1000 V n Multiple package options n Specied from 40- C to +85 C and from 40- C to +125 C74AHC377 74AHCT377 Nexperia Octal D-type ip-op with data enable positive-edge trigger 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74AHC377 74AHC377D 40- C to +125 C SO20 plastic small outline package 20 leads SOT163-1 body width 7.5 mm 74AHC377PW 40- C to +125 C TSSOP20 plastic thin shrink small outline package 20 leads SOT360-1 body width 4.4 mm 74AHCT377 74AHCT377D 40- C to +125 C SO20 plastic small outline package 20 leads SOT163-1 body width 7.5 mm 74AHCT377PW -40 C to +125 C TSSOP20 plastic thin shrink small outline package 20 leads SOT360-1 body width 4.4 mm 4. Functional diagram 3 D0 Q0 2 4 D1 Q1 5 7 D2 Q2 6 FF1 8 D3 Q3 9 to OUTPUTS 13 D4 Q4 12 FF8 14 D5 Q5 15 17 D6 Q6 16 18 D7 Q7 19 1 E 11 CP mna606 Fig 1. Functional diagram 74AHC AHCT377 2 Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 02 12 June 2008 2 of 16