74AXP1T125GWH NXP

74AXP1T125 Dual supply buffer/line driver 3-state Rev. 3 3 November 2021 Product data sheet 1. General description The 74AXP1T125 is a dual supply non-inverting buffer/line driver with 3-state output. It features one input (A), an output (Y), an output enable input (OE) and dual supply pins (V and V ). CCI CCO A HIGH level at pin OE causes the output to assume a high-impedance OFF-state. The inputs are referenced to V and the output is referenced to V . All inputs can be connected directly CCI CCO to V or GND. V can be supplied at any voltage between 0.7 V and 2.75 V and V can be CCI CCI CCO supplied at any voltage between 1.2 V and 5.5 V. This feature allows voltage level translation. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This device ensures very low static and dynamic power consumption across the entire supply range and is fully specified for partial power down applications using I . The I circuitry OFF OFF disables the output, preventing the potentially damaging backflow current through the device when it is powered down. 2. Features and benefits Wide supply voltage range: V : 0.7 V to 2.75 V CCI V : 1.2 V to 5.5 V CCO Low input capacitance C = 0.6 pF (typical) I Low output capacitance C = 1.8 pF (typical) O Low dynamic power consumption C = 0.4 pF at V = 1.2 V (typical) PD CCI Low dynamic power consumption C = 7.1 pF at V = 3.3 V (typical) PD CCO Low static power consumption I = 0.5 A (85 C maximum) CCI Low static power consumption I = 1.8 A (85 C maximum) CCO High noise immunity Complies with JEDEC standard: JESD8-12A.01 (1.1 V to 1.3 V A, OE inputs) JESD8-11A.01 (1.4 V to 1.6 V) JESD8-7A (1.65 V to 1.95 V) JESD8-5A.01 (2.3 V to 2.7 V) JESD8-C (2.7 V to 3.6 V Y output) JESD12-6 (4.5 V to 5.5 V Y output) ESD protection: HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2 kV CDM JESD22-C101E exceeds 1000 V Latch-up performance exceeds 100 mA per JESD78D Class II Inputs accept voltages up to 2.75 V Low noise overshoot and undershoot < 10% of V CCO I circuitry provides partial power-down mode operation OFF Multiple package options Specified from -40 C to +85 CNexperia 74AXP1T125 Dual supply buffer/line driver 3-state 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74AXP1T125GM -40 C to +85 C XSON6 plastic extremely thin small outline package no leads SOT886 6 terminals body 1 1.45 0.5 mm 74AXP1T125GN -40 C to +85 C XSON6 extremely thin small outline package no leads SOT1115 6 terminals body 0.9 1.0 0.35 mm 74AXP1T125GS -40 C to +85 C XSON6 extremely thin small outline package no leads SOT1202 6 terminals body 1.0 1.0 0.35 mm 74AXP1T125GX -40 C to +85 C X2SON6 plastic thermal enhanced extremely SOT1255-2 thin small outline package no leads 6 terminals body 1.0 0.8 0.32 mm 4. Marking Table 2. Marking Type number Marking code 1 74AXP1T125GM rN 74AXP1T125GN rN 74AXP1T125GS rN 74AXP1T125GX rN 1 The pin 1 indicator is located on the lower left corner of the device, below the marking code. 5. Functional diagram A Y 3 A Y 4 OE 5 OE V V CCI CCO aaa-018926 aaa-018927 Fig. 1. Logic symbol Fig. 2. Logic diagram 74AXP1T125 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2021. All rights reserved Product data sheet Rev. 3 3 November 2021 2 / 19