CBTL06GP213 Second-generation high performance general purpose switch Rev. 3.1 13 December 2016 Product data sheet 1. General description The CBTL06GP213 is a six-channel (hex) multiplexer for DisplayPort, HDMI and PCI Express applications at Generation 2 (Gen2) speeds. It provides four differential channels capable of 1 : 2 switching or 2 : 1 multiplexing bidirectional, AC-coupled PCI Express, DisplayPort signals, USB3 SuperSpeed or DC coupled TMDS signals, using high-bandwidth pass-gate technology. It provides support for high common-mode/bias voltage on the high-speed differential channels. Additionally, it provides for switching/multiplexing of the Hot Plug Detect signal as well as the AUX or DDC (Display Data Channel) signals, for a total of six channels on the display side. The AUX and DDC channels provide a four-position multiplexer such that an additional level of multiplexing can be accomplished when AUX and DDC I/Os are on separate pins of the display source device. The CBTL06GP213 is designed for Gen2 speeds, supporting 5.0 Gbit/s for PCI Express, 5.4 Gbit/s for DisplayPort or 6 Gbit/s for HDMI 2.0. It consumes 490 A current (typical) in operational mode and provides a shutdown function to support battery-powered applications. A typical application of CBTL06GP213 is on applications where one of two GPU display sources must be selected to connect to a display sink device or connector. A controller chip selects which path to use by setting a select signal HIGH or LOW. Due to the non-directional nature of the signal paths (which use high-bandwidth pass gate technology), the CBTL06GP213 can also be used in the reverse topology, for example, to connect one display source device to one of two display sink devices or connectors. 2. Features and benefits 1 : 2 switching or 2 : 1 multiplexing of DisplayPort (v1.2 - 5.4 Gbit/s) PCI Express (v2.0 - 5.0 Gbit/s) signals, USB3 SuperSpeed or HDMI 2.0 (6 Gbit/s) TMDS signals 4 high-speed differential channels with 2 : 1 muxing/switching for DisplayPort or PCI Express or HDMI signals 1 channel with 4 : 1 or 4 : 2 muxing/switching for AUX at 1 Mbit/s or DDC signals, USB2 signals 1 channel with 2 : 1 muxing/switching for single-ended HPD signal High-bandwidth analog pass-gate technology Supports high-speed signal switching over a wide common-mode range and differential swing R on DP high-speed channels: 7 ONCBTL06GP213 NXP Semiconductors Second-generation high performance general purpose switch Low insertion loss: 0.9 dB at 100 MHz 1.1 dB at 1.35 GHz 1.3 dB at 2.7 GHz 3 dB bandwidth at 9.5 GHz Low crosstalk: 32 dB at 2.7 GHz Low off-state isolation: 23 dB at 2.7 GHz Low return loss: 19 dB at 2.7 GHz Very low intra-pair skew (5 ps typical) Very low inter-pair skew (< 80 ps) Switch/multiplexer position select CMOS input Shutdown mode CMOS input Supports backdrive protection Single 3.3 V power supply Operation current of 490 A typical, shut-down current 10 A maximum ESD 2 kV HBM, 500 V CDM Available in 5 mm 5 mm, 0.5 mm ball pitch TFBGA50 package 3. Applications Motherboard applications requiring DisplayPort, HDMI, PCI Express, and USB switching/multiplexing Docking stations Notebook computers Chip sets requiring flexible allocation of PCI Express or DisplayPort I/O pins to board connectors 4. Ordering information Table 1. Ordering information Type number Topside Solder process Package marking Name Description Version 1 CBTL06GP213EE GP213 Pb-free (SnAgCu TFBGA50 plastic thin fine-pitch ball grid array package SOT1345-1 2 solder compound) 50 balls body 5 5 0.8 mm 1 Industrial temperature range. 2 Total height including solder balls after printed circuit board mounting = 1.15 mm. For more information on product marking, refer to www.nxp.com/products/related/package-markings.html. CBTL06GP213 All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2016. All rights reserved. Product data sheet Rev. 3.1 13 December 2016 2 of 19