Document Number: MIMXRT1020EVKHUG NXP Semiconductors User s Guide Rev. 0 , 05/2018 MIMXRT1020 EVK Board Hardware Users Guide Contents 1. Introduction 1. Introduction ........................................................................ 1 This Hardware Users Guide for the MIMXRT1020 1.1. Board overview ....................................................... 1 Evaluation Kit (EVK) is based on the NXP Semiconductor 1.2. MIMXRT1020 EVK contents ................................. 2 i.MX RT1020 Processor. This board is fully supported by 1.3. MIMXRT1020 EVK Board revision history ........... 3 NXP Semiconductor. The guide includes system setup and 2. Specifications ..................................................................... 3 2.1. i.MX RT1020 processor .......................................... 5 debugging, and provides detailed information on overall 2.2. Boot Mode configurations ....................................... 5 design and usage of the EVK board from a hardware systems 2.3. Power tree ............................................................... 6 perspective. 2.4. SDRAM memory .................................................... 9 2.5. SD Card slot ............................................................ 9 2.6. QSPI flash ............................................................... 9 2.7. Ethernet connector .................................................. 9 1.1. Board overview 2.8. USB PHY connector ............................................. 10 2.9. Audio input / output connector .............................. 10 This EVK board is a platform designed to showcase the most 2.10. OpenSDA circuit (DAP-Link) ............................... 10 commonly used features of the i.MX RT1020 Processor in a 2.11. JTAG connector .................................................... 10 2.12. Arduino expansion port ......................................... 11 small, low cost package. The MIMXRT1020 EVK board is 2.13. User interface LED indicator ................................ 13 an entry level development board, which gives the developer 3. PCB information .............................................................. 13 the option of becoming familiar with the processor before 4. EVK design files .............................................................. 13 5. Contents of the Evaluation Kit ......................................... 14 investing a large amount or resources in more specific 6. Revision history................................................................ 14 designs. 2018 NXP B.V. Introduction Features of the MIMXRT1020 EVK board are shown in Table 1 Table 1. Board features Processor NXP Processor MIMXRT1021 DRAM Memory SDRAM 256 Mb, 166MHz MT48LC16M16A2P DCDC MPS MP2144GJ LDO UNION UM1750S-00 TF Card Slot Mass Storage 64 Mbit Quad SPI Flash Ethernet 10/100 Mbit/s Ethernet Connector. PHY Chip: KSZ8081RNB USB USB 2.0 OTG Connector 3.5 mm Audio Stereo Headphone Jack Audio Connector Board-Mounted Microphone Left & Right Speaker Out Connectors Power Connector 5V DC-Jack JTAG 20-pin Connector (SWD by default) Debug Connector OpenSDA with DAP-Link Sensor FXOS8700CQ: 6-Axis Ecompass (3-Axis Mag, 3-Axis Accel) CAN CAN Bus Connector User Interface Button ON/OFF, POR Reset, POWER Reset, USER Button Led Indicator Power Status, Reset, OpenSDA, USER LED Expansion Port Arduino Interface PCB 3.543-inch x 5.5118-inch (9cm x 14cm), 2-layer board 1.2. MIMXRT1020 EVK contents The MIMXRT1020 EVK contains the following items: MIMXRT1020 EVK Board USB Cable (Micro B) MIMXRT1020 EVK Board Hardware Users Guide, User s Guide, Rev. 0, 05/2018 2 NXP Semiconductors