N74F14N,602 NXP

INTEGRATED CIRCUITS 74F14 Hex inverter Schmitt trigger Product specification 1990 Nov 26 IC15 Data Handbook Philips Semiconductors Product specification Hex inverter Schmitt trigger 74F14 FEATURE PIN CONFIGURATION Industrial temperature range available (40C to +85C) D0 1 14 V CC Q0 2 13 D5 TYPE TYPICAL TYPICAL SUPPLY D1 3 12 Q5 PROPAGATION CURRENT DELAY (TOTAL) Q1 4 11 D4 74F14 5.0ns 18mA D2 5 10 Q4 Q2 6 9 D3 GND 7 8 Q3 DESCRIPTION SF00028 The 74F14 contains six logic inverters which accept standard TTL input signals and provide standard TTL output levels. They are capable of transforming slowly changing input signals into sharply defined, jitter free output signals. In addition, they have greater noise margin than conventional inverters. Each circuit contains a Schmitt trigger followed by a Darlington level shifter and a phase splitter driving a TTL totem-pole output. The Schmitt trigger uses positive feedback to effectively speed-up slow input transitions, and provide different input threshold voltages for positive-going and negative-going input threshold (typically 800mV) is determined internally by resistor ratios and is insensitive to temperature and supply voltage variations. ORDERING INFORMATION ORDER CODE COMMERCIAL RANGE INDUSTRIAL RANGE DESCRIPTION PKG DWG V = 5V 10%, T = 0C to +70C V = 5V 10%, T = 40C to +85C CC amb CC amb 14-pin plastic DIP N74F14N I74F14N SOT27-1 14-pin plastic SO N74F14D I74F14D SOT108-1 INPUT AND OUTPUT LOADING AND FAN-OUT TABLE PINS DESCRIPTION 74F (U.L.) HIGH/LOW LOAD VALUE HIGH/LOW Dn Data inputs 1.0/1.0 20A/0.6mA Qn Data output 50/33 1.0mA/20mA NOTE: 1 One (1.0) FAST unit load is defined as: 20A in the High state and 0.6mA in the Low state. LOGIC DIAGRAM FUNCTION TABLE INPUTS OUTPUT 1 2 D0 Dn Qn Q0 3 4 L H D1 Q1 H L 5 6 D2 Q2 NOTES: H = High voltage level 9 8 D3 L = Low voltage level Q3 11 10 D4 Q4 13 12 D5 Q5 V = Pin 14 CC GND = Pin 7 SF00029 November 26, 1990 2 853 0331 01123