NX3L2467PW NXP

NX3L2467 Dual low-ohmic double-pole double-throw analog switch Rev. 5 2 July 2012 Product data sheet 1. General description The NX3L2467 is a dual low-ohmic double-pole double-throw analog switch suitable for use as an analog or digital multiplexer/demultiplexer. It consists of four switches, each with two independent input/outputs (nY0 and nY1) and a common input/output (nZ). The two digital inputs (1S and 2S) are used to select the switch position. 1S is used in selecting the independent inputs/outputs switched to 1Z and 2Z, and 2S is used in selecting the independent inputs/outputs switched to 3Z and 4Z. Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels in 3.3 V applications without significant increase in supply current I . This makes it possible for CC the NX3L467 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation. The NX3L2467 allows signals with amplitude up to V to be CC transmitted from nZ to nY0 or nY1 or from nY0 or nY1 to nZ. Its low ON resistance (0.5 ) and flatness (0.13 ) ensures minimal attenuation and distortion of transmitted signals. 2. Features and benefits Wide supply voltage range from 1.4 V to 4.3 V Very low ON resistance (peak): 1.7 (typical) at V =1.4 V CC 1.0 (typical) at V =1.65V CC 0.6 (typical) at V =2.3 V CC 0.5 (typical) at V =2.7 V CC 0.5 (typical) at V =4.3 V CC Break-before-make switching High noise immunity ESD protection: HBM JESD22-A114F Class 3A exceeds 4000 V MM JESD22-A115-A exceeds 200 V CDM AEC-Q100-011 revision B exceeds 1000 V IEC61000-4-2 contact discharge exceeds 6000 V for switch ports CMOS low-power consumption Latch-up performance exceeds 100 mA per JESD 78B Class II Level A 1.8 V control logic at V = 3.6 V CC Control input accepts voltages above supply voltage Very low supply current, even when input is below V CC High current handling capability (350 mA continuous current under 3.3 V supply) Specified from 40 C to +85 C and from 40 C to +125 CNX3L2467 NXP Semiconductors Dual low-ohmic double-pole double-throw analog switch 3. Applications Cell phone PDA Portable media player 4. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version NX3L2467PW 40 C to +125 C TSSOP16 plastic thin shrink small outline package 16 leads SOT403-1 body width 4.4 mm NX3L2467HR 40 Cto+125 C HXQFN16 plastic thermal enhanced extremely thin quad flat SOT1039-2 package no leads 16 terminals body 3 3 0.5 mm NX3L2467GU 40 C to +125 C XQFN16 plastic, extremely thin quad flat package no leads SOT1161-1 16 terminals body 1.80 2.60 0.50 mm 5. Marking Table 2. Marking codes Type number Marking code NX3L2467PW X3L2467 NX3L2467HR D67 NX3L2467GU D67 NX3L2467 All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 5 2 July 2012 2 of 24