NX5P3090 USB PD and type C current-limited power switch Rev. 1 1 August 2016 Product data sheet 1. General description The NX5P3090 is a precision adjustable current-limited power switch for USB PD application. The device includes under voltage lockout, over-temperature protection, and reverse current protection circuits to automatically isolate the switch terminals when a fault condition occurs. The 29 V tolerance on VBUS pin ensures the device is able to work on a USB PD port a current limit input (ILIM) pin defines the over-current limit threshold an open-drain fault output (FAULT) indicates when a fault condition has occurred. The over-current limit threshold can be programmed from 400 mA to 3.3 A, using an external resistor between the ILIM pin and GND pin. In the over current condition, the device will clamp the output current to the value set by ILIM and keep the switch on while assert the FAULT flag. To minimize current surges during turn on, the device has built in soft start which controls the power switch rise time. Surge protection has been integrated in the device to enhance system robustness. The enable input includes integrated logic level translation making the device compatible with lower voltage processors and controllers. NX5P3090 is offered in a 12 bump 1.35 x 1.65 mm, 0.4 mm pitch WLCSP package. 2. Features and benefits VINT supply voltage range from 2.5 V to 5.5 V 29 V tolerance on VBUS and EN pin Adjustable current limit from 400 mA to 3.3 A Clamped current output in over-current condition Very low ON resistance: 34 m (typical) Active HIGH EN pin with internal pull down resistor All time Reverse Current Protection Over Temperature Protection Surge protection: IEC61000-4-5 exceeds 80 V on VBUS Safety approvals UL 62368-1, 2nd Edition, File no. 20160526-E470128 IEC 62368-1 (ed.2), File no. DK-54536-UL ESD protection IEC61000-4-2 contact discharge exceeds 8 kV on VBUS HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2 kV CDM AEC standard Q100-01 (JESD22-C101E) exceeds 500 V Specified from 40 Cto+85 C ambient temperatureNX5P3090 NXP Semiconductors USB PD and type C current-limited power switch 3. Applications Notebook and Ultrabook USB PD and Type C port/hubs Tablet and Smart phone 4. Ordering information Table 1. Ordering information Type number Topside Package marking Name Description Version NX5P3090UK X5PT2 WLCSP12 wafer level chip-scale package 12 bumps 1.65 x 1.35 x SOT1390-5 0.525 mm 0.4 mm pitch (backside coating included) 4.1 Ordering options Table 2. Ordering options Type number Orderable Package Packing method Minimum Temperature part number order quantity NX5P3090UK NX5P3090UKZ WLCSP12 REEL 7 Q1/T1 3000 T = 40 C to +85 C amb *SPECIAL MARK CHIPS DP 5. Marking Table 3. Marking Line Marking Description A X5PT2 basic type name B mmmmm wafer lot code (mmmmm) C Z5YWW manufacturing code Z = foundry location 5 = assembly location Y = assembly year code WW = assembly week code NX5P3090 All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2016. All rights reserved. Product data sheet Rev. 1 1 August 2016 2 of 33