EE-SX971-C1 Omron

Slot-type Photomicrosensor EE-SX97 CSM EE-SX97 DS E 1 3 Built-in connector enables downsizing and easier connection. Protective circuit for safe operation. A built-in connector minimizes the shape and dimensional requirements. Two outputs: light-ON and dark-ON. Complete lineup including seven different shapes. Safer operation with built-in power supply reverse polarity protection. Output overcurrent protection with a thermal shutdown circuit (patent pending). *1 The indicator can be seen from many directions to enable installation in more locations. Connector with lock that mates with commercially available connectors. *2 *1. Output overcurrent protection is provided only on output 2 (OUT2) on NPN models. *2. Recommended connector: J.S.T. Mfg. Co., Ltd. Contacts: SPHD-001T-P0.5, Housing: PAP-04V-S Ask the manufacturer of the connector for details. For the most recent information on models that have been certified for Be sure to read the Safety Precautions safety standards, refer to your OMRON website. on page 5. Features Built-in Connector for Downsizing and Easier Connection A built-in connector minimizes the shape and dimensional requirements. And wiring costs can be reduced by using commercially available connectors. Previous Model EE-SX97 Series Use 22.0 22.2 Commercial Connectors The use of a commercially available connector (2.2) (16.2) simplifies connections and the positive lock Approx. holds the connector in place. 40% Recommended Connector: J.S.T. Mfg. Co., Ltd. Smaller Contacts: SPHD-001T-P0.5, Housing: PAP-04V-S *Ask the manufacturer of the connector for details. Safer Operation with Built-in Power Supply Easy-to-see Indicator Reverse Polarity Protection The indicator can be seen from up to four directions to enable installation in more locations. The built-in power supply reverse polarity protection protects against reverse connection of the power supply or outputs for safer operation at the assembly site. NPN Vcc Light indicator 1 (orange) Load 1 OUT1 2 Load 2 (Control Main output) circuit OUT2 5 to 3 24 VDC (Control output) GND (0 V) 4 Display Reverse polarity protection Built-in Thermal Shutdown Circuit Two Outputs: Light-ON and Dark-ON Control output 2 on models with NPN outputs is protected from All models provide both a light-ON and dark-ON output so that output overcurrents by a built-in thermal shutdown circuit. the output can be switched according to the application simply by changing the wiring. 1EE-SX97 Ordering Information Sensors Infrared light Model Sensing Connecting Operating Indicator Appearance Sensing distance method method mode mode NPN output PNP output Standard EE-SX970-C1 EE-SX970P-C1 L-shaped EE-SX971-C1 EE-SX971P-C1 T-shaped, slot center EE-SX972-C1 EE-SX972P-C1 7 mm Close-mounting Through- Connector Dark-ON/ Incident 5 mm beam type model Light-ON EE-SX974-C1 EE-SX974P-C1 light (slot (with slot) (4 poles) (2 outputs) width) T-shaped, slot center EE-SX975-C1 EE-SX975P-C1 10 mm F-shaped EE-SX976-C1 EE-SX976P-C1 R-shaped EE-SX977-C1 EE-SX977P-C1 Accessories (Order Separately) Type Cable length Model 1 m EE-1017 1M Connector with Cable 3 m EE-1017 3M 1 m EE-1017-R 1M Connector with Robot Cable 3 m EE-1017-R 3M 2