74AC00, 74ACT00 Quad 2-Input NAND Gate
74AC00, 74ACT00
Quad 2-Input NAND Gate
Features General Description
I reduced by 50% The AC00/ACT00 contains four, 2-input NAND gates.
CC
Outputs source/sink 24mA
ACT00 has TTL-compatible inputs
Ordering Information
Order Package
Number Number Package Description
74AC00SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
74AC00SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74AC00MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm
Wide
74AC00PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
74ACT00SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
74ACT00SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74ACT00MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm
Wide
74ACT00PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Device also available in Tape and Reel. Specify by appending suffix letter X to the ordering number.
All packages are lead free per JEDEC: J-STD-020B standard.
Connection Diagram Logic Symbol
IEEE/IEC
Pin Description
Pin Names Description
A , B Inputs
n n
O Outputs
n
Publication Order Number:
1988 Semiconductor Components Industries, LLC.
November-2017, Rev. 2
74ACT00/D74AC00, 74ACT00 Quad 2-Input NAND Gate
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol Parameter Rating
V Supply Voltage 0.5V to +7.0V
CC
DC Input Diode Current
I
IK
= 0.5V 20mA
V
I
V = V + 0.5 +20mA
I CC
DC Input Voltage 0.5V to V + 0.5V
V
I CC
DC Output Diode Current
I
OK
V = 0.5V 20mA
O
= V + 0.5V +20mA
V
O CC
DC Output Voltage 0.5V to V + 0.5V
V
O CC
I DC Output Source or Sink Current 50mA
O
or I DC V or Ground Current per Output Pin 50mA
I
CC GND CC
Storage Temperature 65C to +150C
T
STG
T Junction Temperature 140C
J
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. ON
Semiconductor does not recommend exceeding them or designing to absolute maximum ratings.
Symbol Parameter Rating
V Supply Voltage
CC
AC 2.0V to 6.0V
ACT 4.5V to 5.5V
V Input Voltage 0V to V
I CC
V Output Voltage 0V to V
O CC
T Operating Temperature 40C to +85C
A
125mV/ns
V / t Minimum Input Edge Rate, AC Devices:
from 30% to 70% of V , V @ 3.3V, 4.5V, 5.5V
V
IN CC CC
V 125mV/ns
/ t Minimum Input Edge Rate, ACT Devices:
from 0.8V to 2.0V, V @ 4.5V, 5.5V
V
IN CC
www.onsemi.com
2