CSPEMI204 EMI Filter with ESD Protection Product Description The CSPEMI204 is an LRC EMI filter array with ESD protection that integrates two Pifilters (CLRC) to suppress EMI/RFI Noise. www.onsemi.com CSPEMI204 includes ESD protection diodes on all input/output pins, and provides a very high level of protection for sensitive electronic components against possible electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of 30kV, which is beyond the maximum requirement of the WLCSP5 IEC6100042 international standard. FC SUFFIX CASE 567MA Features Two Channels of EMI Filtering BLOCK DIAGRAM 30 kV ESD Protection (IEC 6100042, Contact Discharge) 30 kV ESD Protection (IEC 6100042, Air Discharge) Filter 1 Filter 2 A1 A3 C1 C3 Greater than 45 dB of Attenuation at 900 MHz These Devices are PbFree, Halogen Free/BFR Free and are RoHS Compliant Applications GND B1 GND B1 Mobile Phones MARKING DIAGRAM MAXIMUM RATINGS (T = 25C) A Rating Symbol Value Unit ATM ESD Discharge IEC6100042 V kV pp Contact Discharge 30 AT = Specific Device Code Air Discharge 30 M = Date Code RMS Current per Line I 350 mA Line Operating Temperature Range T 40 to +125 C J ORDERING INFORMATION Storage Temperature Range T 55 to +150 C stg Device Package Shipping Lead Solder Temperature T 260 C L CSPEMI204FCTAG WLCSP5 5000 / Tape & (10 second duration) (PbFree) Reel Stresses exceeding those listed in the Maximum Ratings table may damage the For information on tape and reel specifications, device. If any of these limits are exceeded, device functionality should not be including part orientation and tape sizes, please assumed, damage may occur and reliability may be affected. refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: August, 2015 Rev. 0 CSPEMI204/DCSPEMI204 PACKAGE/PINOUT DIAGRAMS Table 1. PIN DESCRIPTIONS Pin Name Description Top View Bottom View (Bumps Down View) (Bumps Up View) A1 Filter 1 Filter 1 Input/Output Orientation C1 Filter 1 Filter 1 Input/Output Marking C B A A3 Filter 2 Filter 2 Input/Output + 1 A1 C1 C3 Filter 2 Filter 2 Input/Output B2 AT 2 B2 GND Device Ground A3 C3 3 WLCSP5 Package Table 2. ELECTRICAL OPERATING CHARACTERISTICS (T = 25C unless otherwise noted) A Symbol Parameter Test Conditions Min Typ Max Unit V Working Voltage 3.0 V RWM V Breakdown Voltage I = 1 mA (Note 4) 6.0 V BR T I Channel Leakage Current V = 3.0 V, GND = 0 V 400 nA LEAK IN R Channel Resistance 3.0 CH (Pins A1 A3, C1 C3) C Line Capacitance V = 0 V, f = 1 MHz 185 250 315 pF t R f Cutoff Frequency 450 Source and 2.0 MHz 3dB 10 k Load Termination f Cutoff Frequency 50 Termination 25 MHz 3dB F Stop Band Attenuation 700 MHz 40 dB atten 900 MHz 47 V Insystem ESD Withstand Voltage (Notes 1 and 2) kV ESD a) Contact discharge per IEC 6100042 standard, Level 4 30 (External Pins) 30 b) Contact discharge per IEC 6100042 standard, Level 1 (Internal Pins) V TLP Clamping Voltage Forward I = 8 A 9.8 V CL PP Forward I = 16 A 11.5 PP Forward I = 8 A 9.7 PP Forward I = 16 A 11.7 PP Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. Standard IEC6100042 with C = 150 pF, R = 330, GND grounded. Discharge Discharge 2. These measurements performed with no external capacitor. 3. TVS devices are normally selected according to the working peak reverse voltage (V ), which should be equal to or greater than the DC RWM or continuous peak operating voltage level. 4. V is measured at pulse test current I . BR T www.onsemi.com 2 +