ON Semiconductor Is Now To learn more about onsemi, please visit our website at www.onsemi.com onsemi andand other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba onsemi or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided as-is and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. Typical parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and holdo nsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. FNA23512A 1200 V Motion SPM 2 Series FNA23512A 1200 V Motion SPM 2 Series Features General Description The FNA23512A is a Motion SPM 2 module providing a UL Certified No. E209204 (UL1557) fully-featured, high-performance inverter output stage for 1200 V - 35 A 3-Phase IGBT Inverter, Including AC induction, BLDC, and PMSM motors. These modules Control ICs for Gate Drive and Protections integrate optimized gate drive of the built-in IGBTs to Low-Loss, Short-Circuit-Rated IGBTs minimize EMI and losses, while also providing multiple on-module protection features: under-voltage lockouts, Very Low Thermal Resistance Using Al O DBC 2 3 over-current shutdown, temperature sensing, and fault Substrate reporting. The built-in, high-speed HVIC requires only a Built-In Bootstrap Diodes and Dedicated Vs Pins single supply voltage and translates the incoming logic- Simplify PCB Layout level gate inputs to high-voltage, high-current drive signals to properly drive the module s internal IGBTs. Separate Open-Emitter Pins from Low-Side IGBTs for Separate negative IGBT terminals are available for each Three-Phase Current Sensing phase to support the widest variety of control algorithms. Single-Grounded Power Supply Supported Built-In NTC Thermistor for Temperature Monitoring and Management Adjustable Over-Current Protection via Integrated Sense-IGBTs Isolation Rating of 2500 Vrms / 1 min. Applications Motion Control - Industrial Motor (AC 400 V Class) Related Resources AN-9075 - Users Guide for 1200V SPM 2 Series AN-9076 - Mounting Guide for New SPM 2 Package AN-9079 - Thermal Performance of 1200V Motion SPM 2 Series by Mounting Torque Figure 1. Package Overview Package Marking and Ordering Information Device Device Marking Package Packing Type Quantity FNA23512A FNA23512A SPMCA-A34 Rail 6 2014 SSemiconductor Components Industries, LLC. Publication Order Number: October-2017,Rev.3 FNA23512A/D