Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. Typical parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.FPF2024/25/26/27 Full Function Load Switch with 100 mA Current Limit April 2016 FPF2024/25/26/27 Full Functional Load Switch with 100 mA Current Limit Description Features The FPF2024/5/6/7 are low R P-Channel MOSFET DS(ON) 1.6 V to 5.5 V Input Voltage Range load switches with 150 mA typical current limit value Ultra Low Average Quiescent Current 1 A targeting small package load switch applications. The Typical at1.8 V extended input voltage range spans from 1.6 V to 5.5 V to fulfill today s ultra-portable device s supply Typical R = 225 m at V = 3.3 V DS(ON) IN requirements. Switch control is by a logic input (ON) Typical R = 280 m at V = 1.8 V DS(ON) IN capable of interfacing directly with a low voltage control signal. 100 mA Fixed Current Limit Minimum The FPF2024/25/26/27 respond to an output overload Under-Voltage Lockout (UVLO) condition by going into constant current mode where the CMOS and Open Drain Fault Flag Options output current is regulated by the load switch. If the over-current condition persists beyond the 10 ms Fault Blanking Blanking Time, the FPF2024 and FPF2025 pull the fault Auto Restart signal pin (FLAGB) low and shut-off the switch. An Auto- Restart feature turns the FPF2024 and FPF2025 on Thermal Shutdown again after 70 ms if the ON pin is still active. The ESD Protection FPF2026 has a Latch-Off feature which shuts off the switch off after the expiration of the 10 ms Blanking o >5500 V HBM Time and keeps it off until the ON pin is toggled. The o >1500 V CDM FPF2027 responds to an overload condition by immediately pulling the fault signal pin LOW and the switch remains in constant current mode until the output Applications overload condition is removed. The FPF2027 has a Startup Blanking feature which prevents startup PDAs transient over-current conditions from triggering the fault Cell Phones signal pin for 10 ms after initial turn on via the ON pin. GPS Devices These parts are available in a space-saving 6-ball 2 Digital Cameras advanced. Pb-Free 1.0 x1.5 mm CSP package. Peripheral Ports MP3 Players 2 Figure 1. 6-Ball 1.0 x1.5 mm CSP Package 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FPF2024/25/26/27 Rev. 1.1