ON Semiconductor Is Now To learn more about onsemi, please visit our website at www.onsemi.com onsemi andand other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba onsemi or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided as-is and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. Typical parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and holdo nsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. KAF-50100 8176 (H) x 6132 (V) Full Frame CCD Image Sensor Description The KAF 50100 Image Sensor is a high performance, 50-megapixel CCD. Based on the TRUESENSE 6.0 micron Full Frame CCD Platform, the sensor features ultra-high resolution, broad www.onsemi.com dynamic range, and a four-output architecture. A lateral overflow drain suppresses image blooming, while an integrated Pulse Flush Gate clears residual charge on the sensor with a single electrical pulse. A Fast Dump Gate can be used to selectively remove a line of charge to facilitate partial image readout. The sensor also utilizes the TRUESENSE Transparent Gate Electrode to improve sensitivity compared to the use of a standard front side illuminated polysilicon electrode. The sensor shares a common pin-out and electrical configuration with the KAF40000 Image Sensor, allowing a single camera design to support both members of this sensor family. Table 1. GENERAL SPECIFICATIONS Figure 1. KAF50100 Full Frame CCD Parameter Typical Value Image Sensor Architecture Full Frame CCD (Square Pixels) Total Number of Pixels 8304 (H) 6220 (V) = 51.6 Mp Features Number of Effective Pixels 8208 (H) 6164 (V) = 50.5 Mp Number of Active Pixels 8176 (H) 6132 (V) = 50.1 Mp TRUESENSE Transparent Gate Electrode Pixel Size 6.0 m (H) 6.0 m (V) for High Sensitivity Active Image Size 49.1 mm (H) 36.8 mm (V) Ultra-High Resolution 61.3 mm (Diagonal), Board Dynamic Range 645 1.1x Optical Format Low Noise Architecture Aspect Ratio 4:3 Large Active Imaging Area Horizontal Outputs 4 Saturation Signal 40.3 ke Applications Output Sensitivity 31 V/e Digitization Quantum Efficiency KAF50100CAA 22%, 22%, 16% (Peak R, G, B) Mapping/Aerial KAF50100AAA 25% Photography KAF50100ABA (with Lens) 62% Scientific Read Noise (f = 18 MHz) 12.5 e 2 Dark Signal (T = 60C) 42 pA/cm ORDERING INFORMATION Dark Current Doubling Temperature 5.7C See detailed ordering and shipping information on page 2 of Dynamic Range (f = 18 MHz) 70.2 dB this data sheet. Estimated Linear Dynamic Range 69.3 dB (f = 18 MHz) Charge Transfer Efficiency Horizontal 0.999995 Vertical 0.999999 Blooming Protection 800X Saturation Exposure (4 ms Exposure Time) Maximum Date Rate 18 MHz Package Ceramic PGA Cover Glass MAR Coated, 2 Sides or Clear Glass NOTE: All Parameters are specified at T = 40C unless otherwise noted. Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: December, 2015 Rev. 4 KAF50100/D