ON Semiconductor Is Now To learn more about onsemi, please visit our website at www.onsemi.com onsemi andand other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba onsemi or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided as-is and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. Typical parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and holdo nsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. KLI-8023 Linear CCD Image Sensor Description The KLI8023 Image Sensor is a multispectral, linear solid state image sensor for color scanning applications where ultra-high www.onsemi.com resolution is required. The imager consists of three parallel linear photodiode arrays, each with 8,000 active photosites for the output of red, green, and blue (R, G, B) signals. This device offers high sensitivity, high data rates, low noise and negligible lag. Individual electronic exposure control for each color allows the KLI8023 sensor to be used under a variety of illumination conditions. The imager can be operated in an Extended Dynamic Range mode for the most demanding applications. Table 1. GENERAL SPECIFICATIONS Parameter Typical Value Architecture 3 Channel, RGB Trilinear CCD Figure 1. KLI8023 Linear CCD Image Sensor Pixel Count 8002 3 Pixel Size 9 m (H) 9 m (V) Features Pixel Pitch 9 m 12 Line Spacing between Color Channels Inter-Array Spacing 108 m (12 Lines Effective) Single Shift Register per Channel Imager Size 72.0 mm (H) 0.225 mm (V) High Off-Band Spectral Rejection Saturation Signal 185 ke (Normal DR Mode) Dark Reference Pixels Provided 400 ke (Extended DR Mode) Anti-Reflective Glass Dynamic Range 84 dB (Normal DR Mode) (2 MHz Data Rate) 90 dB (Extended DR Mode) Wide Dynamic Range, Low Noise Dual Dynamic Range Mode Operation Responsivity 2 R, G, B (RAA) 32, 20, 20 V/ J/cm No Image Lag 2 R, G, B (DAA) 29, 19, 18 V/ J/cm 2 Electronic Exposure Control Mono (AAA, SAA, MAA) 33 V/ J/cm High Charge Transfer Efficiency Output Sensitivity 14.4 V/e Two-Phase Register Clocking Dark Current 0.002 pA/Pixel 74 ACT Logic Compatible Clocks Dark Current Doubling Rate 8C 6 MHz Maximum Data Rate Charge Transfer Efficiency 0.999998/Transfer Photoresponse Non-Uniformity 3% Peak-Peak Applications Lag (First Field) 0.025% Digitization Maximum Data Rate 6 MHz/Channel Medical Imaging Photography Package CERDIP (Sidebrazed, CuW) Cover Glass AR Coated, 2 Sides ORDERING INFORMATION NOTE: Parameters above are specified at T = 25C (junction temperature) See detailed ordering and shipping information on page 2 of and 1 MHz clock rates unless otherwise noted. this data sheet. Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: March, 2017 Rev. 3 KLI8023/D