KLI-8023 Linear CCD Image Sensor Description The KLI8023 Image Sensor is a multispectral, linear solid state image sensor for color scanning applications where ultra-high www.onsemi.com resolution is required. The imager consists of three parallel linear photodiode arrays, each with 8,000 active photosites for the output of red, green, and blue (R, G, B) signals. This device offers high sensitivity, high data rates, low noise and negligible lag. Individual electronic exposure control for each color allows the KLI8023 sensor to be used under a variety of illumination conditions. The imager can be operated in an Extended Dynamic Range mode for the most demanding applications. Table 1. GENERAL SPECIFICATIONS Parameter Typical Value Architecture 3 Channel, RGB Trilinear CCD Figure 1. KLI8023 Linear CCD Image Sensor Pixel Count 8002 3 Pixel Size 9 m (H) 9 m (V) Features Pixel Pitch 9 m 12 Line Spacing between Color Channels Inter-Array Spacing 108 m (12 Lines Effective) Single Shift Register per Channel Imager Size 72.0 mm (H) 0.225 mm (V) High Off-Band Spectral Rejection Saturation Signal 185 ke (Normal DR Mode) Dark Reference Pixels Provided 400 ke (Extended DR Mode) Anti-Reflective Glass Dynamic Range 84 dB (Normal DR Mode) (2 MHz Data Rate) 90 dB (Extended DR Mode) Wide Dynamic Range, Low Noise Dual Dynamic Range Mode Operation Responsivity 2 R, G, B (RAA) 32, 20, 20 V/ J/cm No Image Lag 2 R, G, B (DAA) 29, 19, 18 V/ J/cm 2 Electronic Exposure Control Mono (AAA, SAA, MAA) 33 V/ J/cm High Charge Transfer Efficiency Output Sensitivity 14.4 V/e Two-Phase Register Clocking Dark Current 0.002 pA/Pixel 74 ACT Logic Compatible Clocks Dark Current Doubling Rate 8C 6 MHz Maximum Data Rate Charge Transfer Efficiency 0.999998/Transfer Photoresponse Non-Uniformity 3% Peak-Peak Applications Lag (First Field) 0.025% Digitization Maximum Data Rate 6 MHz/Channel Medical Imaging Photography Package CERDIP (Sidebrazed, CuW) Cover Glass AR Coated, 2 Sides ORDERING INFORMATION NOTE: Parameters above are specified at T = 25C (junction temperature) See detailed ordering and shipping information on page 2 of and 1 MHz clock rates unless otherwise noted. this data sheet. Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: March, 2017 Rev. 3 KLI8023/DKLI8023 ORDERING INFORMATION Table 2. ORDERING INFORMATION KLI8023 IMAGE SENSOR Part Number Description Marking Code KLI8023AAAEDAA Monochrome, No Microlens, CERDIP Package (Leadframe), KLI8023 (Lot Code) Clear Cover Glass with AR Coating (Both Sides), Standard Grade (Serial Number) KLI8023AAAEDAE Monochrome, No Microlens, CERDIP Package (Leadframe), Clear Cover Glass with AR Coating (Both Sides), Engineering Sample KLI8023AAAERAA Monochrome, No Microlens, CERDIP Package (Leadframe), KLI8023 (Lot Code) (Serial Number) Clear Cover Glass with AR Coating (Both Sides), Standard Grade KLI8023AAAERAE Monochrome, No Microlens, CERDIP Package (Leadframe), Clear Cover Glass with AR Coating (Both Sides), Engineering Sample KLI8023RAAEDAA Gen2 Color (RGB), No Microlens, CERDIP Package (Leadframe), KLI8023 (Lot Code) Clear Cover Glass with AR Coating (Both Sides), Standard Grade (Serial Number) KLI8023RAAEDAE Gen2 Color (RGB), No Microlens, CERDIP Package (Leadframe), Clear Cover Glass with AR Coating (Both Sides), Engineering Sample KLI8023SAAEDAA Monochrome with RB Surround Gen2, No Microlens, CERDIP Package KLI8023 (Lot Code) (Leadframe), Clear Cover Glass with AR Coating (Both Sides), Standard (Serial Number) Grade KLI8023SAAEDAE Monochrome with RB Surround Gen2, No Microlens, CERDIP Package (Leadframe), Clear Cover Glass with AR Coating (Both Sides), Engineering Sample KLI8023MAAEDAA* Monochrome with RB Surround Gen1, No Microlens, CERDIP Package KLI8023 (Lot Code) (Leadframe), Clear Cover Glass with AR Coating (Both Sides), Standard (Serial Number) Grade KLI8023MAAEDAE* Monochrome with RB Surround Gen1, No Microlens, CERDIP Package (Leadframe), Clear Cover Glass with AR Coating (Both Sides), Engineering Sample KLI8023DAAEDAA* Gen1 Color (RGB), No Microlens, CERDIP Package (Leadframe), KLI8023 (Lot Code) Clear Cover Glass with AR Coating (Both Sides), Standard Grade (Serial Number) KLI8023DAAEDAE* Gen1 Color (RGB), No Microlens, CERDIP Package (Leadframe), Clear Cover Glass with AR Coating (Both Sides), Engineering Sample *Not recommended for new designs. Table 3. ORDERING INFORMATION EVALUATION SUPPORT Part Number Description KLI8023125AEVK Evaluation Board (Complete Kit) See the ON Semiconductor Device Nomenclature document (TND310/D) for a full description of the naming convention used for image sensors. For reference documentation, including information on evaluation kits, please visit our web site at www.onsemi.com. www.onsemi.com 2