LV8714TASLDGEVK Dual Stepper Motor Driver Module Solution Kit Quick Start Guide Overview www.onsemi.com The LV8714TASLDGEVB is an ON semiconductor motor driver module featuring the LV8714TA. This module is capable of easily EVAL BOARD USERS MANUAL driving dual stepper motors. 1) Motor driving is made easy with Arduino Micro compatibility. The LV8714TASLDGEVB comes with a Baseboard for facilitated plugandplay connectivity with an Arduino Micro. GUI and Open source API functions give strong contribution to your easy and immediate motor driving experiences. Features 2) VCCmax = 18 V, IOmax = 1.5 A (OUT AB, OUT CD, OUT EF, OUT GH, Respectively) 6 12 V Applications Recommended (VCC = 4 16.5 V Recommended) Standby Current Consumption = 0 Figure 1. LV8714TASLDGEVB Board In Addition to the Full Step (2phase Excitation) and the Half Step (12phase) Excitation, the External VREF Input Can be Used to Achieve 1/256 Excitation Method, (Higher than the Maximum Resolution of our Conventional Product 1/128 Step) Userfriendly GUI Allows Operation Check and Sample Program Generation For further product information, please visit:. LV8714TASLDGEVK WHAT YOU NEED PC Recommended OS: Windows 7/ Windows10, 64 bit Connected to the Internet (Only for Including TimerThree Libraries on page 3) 3) ArduinoIDE 1. 8.4 installed Users with administrator rights Power supply AC adapter Output voltage: 4 16.5 V Output current: ~6 A Connector specification: Polarization: Positive Center Inner diameter = 2.1 mm, Outer diameter = 5.5 mm Recommended: WSU1201000 (TRIAD Magnetics) or DC current stabilizing power supply, batteries, etc. CONTENTS OF THE KIT Hardware LV8714TASLDGEVB: motor driver module ONBB4AMGEVB: baseboard Arduino Micro USBCable (M Micro BA) Flattip screw driver Stepper motor MDP35A (NIDEC SEIMITSU CORPORATION, step angle = 7.5, 12 V / 300 mA) x 1 Software All of the following files are included in LV8714TASLDGEVK Software (English) that is available on the website of the following links.