Switchmode Power Rectifiers 2 TO220/D PAK Surface Mount Power Package MBRB2060CTG, MBR2060CTG, www.onsemi.com NRVBB2060CTT4G SCHOTTKY BARRIER These state-of-the-art devices employ the use of the Schottky Barrier RECTIFIERS principle with a platinum barrier metal. 20 AMPERES, 60 VOLTS Features 2 Package Designed for Power Surface Mount Applications (D PAK) 2 Center-Tap Configuration (D PAK) Guardring for Stress Protection Low Forward Voltage 175C Operating Junction Temperature Epoxy Meets UL 94 V0 0.125 in 2 Short Heat Sink Tab Manufactured Not Sheared (D PAK) Similar in Size to Industry Standard TO220 Package NRVBB Prefix for Automotive and Other Applications Requiring 2 D PAK3 TO220 Unique Site and Control Change Requirements AECQ101 CASE 418B CASE 221A STYLE 3 STYLE 6 Qualified and PPAP Capable These are PbFree Devices 1 Mechanical Characteristics: 4 Case: Epoxy, Molded, Epoxy Meets UL 94 V0 3 2 Weight: 1.7 Grams (Approximately) D PAK, MARKING DIAGRAMS 1.9 Grams (Approximately) TO220 Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable AY WW Lead and Mounting Surface Temperature for Soldering Purposes: 2 260C Max. for 10 Seconds (D PAK) B2060G AY WW 2 AKA Device Meets MSL1 Requirements (D PAK) B2060G AKA ESD Ratings: Machine Model = C (> 400 V) Human Body Model = 3B (> 8000 V) A = Assembly Location Y = Year WW = Work Week B2060 = Device Code G = PbFree Package AKA = Diode Polarity ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Semiconductor Components Industries, LLC, 2014 1 Publication Order Number: November, 2020 Rev. 10 MBRB2060CT/DMBRB2060CTG, MBR2060CTG, NRVBB2060CTT4G MAXIMUM RATINGS (Per Leg) Rating Symbol Value Unit Peak Repetitive Reverse Voltage V 60 V RRM Working Peak Reverse Voltage V RWM DC Blocking Voltage V R Average Rectified Forward Current I 10 A F(AV) (Rated V , T = 110C) Total Device 20 R C Peak Repetitive Forward Current I A FRM (Rated V , Square Wave, 20 kHz, T = 100C) 20 R C Non-Repetitive Peak Surge Current I A FSM (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) 150 Peak Repetitive Reverse Surge Current (2.0 s, 1.0 kHz) I 0.5 A RRM Storage Temperature Range T 65 to +175 C stg Operating Junction Temperature (Note 1) T 65 to +175 C J Voltage Rate of Change (Rated V ) dv/dt 10,000 V/ s R Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. The heat generated must be less than the thermal conductivity from JunctiontoAmbient: dP /dT < 1/R . D J JA THERMAL CHARACTERISTICS (Per Leg) Characteristic Symbol Value Unit Thermal Resistance, C/W JunctiontoCase R 2.0 JC JunctiontoAmbient (Note 2) R 50 JA MBRB2060CTG JunctiontoAmbient (Note 2) R 60 JA MBR2060CTG 2. When mounted using minimum recommended pad size on FR4 board. ELECTRICAL CHARACTERISTICS (Per Leg) Characteristic Symbol Value Unit Maximum Instantaneous Forward Voltage (Note 3) v V F (i = 20 Amps, T = 125C) 0.85 F J (i = 20 Amps, T = 25C) 0.95 F J Maximum Instantaneous Reverse Current (Note 3) i mA R (Rated dc Voltage, T = 125C) 35 J (Rated dc Voltage, T = 25C) 0.15 J Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%. ORDERING INFORMATION Device Package Shipping 2 MBRB2060CTG D PAK 50 Units / Rail (PbFree) 2 MBRB2060CTT4G D PAK 800 Units / Tape & Reel (PbFree) 2 NRVBB2060CTT4G* D PAK 800 Units / Tape & Reel (PbFree) MBR2060CTG TO220 50 Units / Rail (PbFree) For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NRVBB Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements AEC Q101 Qualified and PPAP Capable www.onsemi.com 2