MBRB2535CTLG, NRVBB2535CTLG Preferred Device SWITCHMODE Power Rectifier 2 D PAK Surface Mount Power Package MBRB2535CTLG, NRVBB2535CTLG MAXIMUM RATINGS (Per Leg) Rating Symbol Value Unit Peak Repetitive Reverse Voltage V 35 V RRM Working Peak Reverse Voltage V RWM DC Blocking Voltage V R Average Rectified Forward Current, (Rated V , T = 110C) I 12.5 A R C F(AV) Peak Repetitive Forward Current, (Rated V , Square Wave, 20 kHz, T = 90C) I 25 A R C FRM NonRepetitive Peak Surge Current I A FSM (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) 150 Peak Repetitive Reverse Surge Current (2.0 s, 1.0 kHz) I 1.0 A RRM Storage Temperature Range T 65 to +150 C stg Operating Junction Temperature T 65 to +125 C J Voltage Rate of Change (Rated V ) dv/dt 10,000 V/ s R Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICS (Per Leg) Characteristic Symbol Value Unit Thermal Resistance C/W Junction toCase R 1.0 JC JunctiontoAmbient (Note 1) R 84 JA 1. When mounted using minimum recommended pad size on FR4 board. ELECTRICAL CHARACTERISTICS (Per Leg) Characteristic Symbol Value Unit Maximum Instantaneous Forward Voltage (Note 2) v V F (i = 25 A, T = 25C) 0.55 F J (i = 12.5 A, T = 125C) 0.41 F J (i = 12.5 A, T = 25C) 0.47 F J Maximum Instantaneous Reverse Current (Note 2) I mA R (Rated dc Voltage, T = 125C) 500 J (Rated dc Voltage, T = 25C) 10 J 2. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%.