MBRM1H100T3G Surface Mount Schottky Power Rectifier POWERMITE Power Surface Mount Package MBRM1H100T3G MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage V 100 V RRM V RWM Working Peak Reverse Voltage V R DC Blocking Voltage Average Rectified Forward Current I 1.0 A O (T = 168C) L NonRepetitive Peak Surge Current I 50 A FSM (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) Storage and Operating Junction Temperature Range (Note 1) T , T 65 to +175 C stg J Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. The heat generated must be less than the thermal conductivity from JunctiontoAmbient: dP /dT < 1/R . D J JA THERMAL CHARACTERISTICS Characteristic Symbol Value Unit Thermal Resistance, JunctiontoLead (Note 2) 12 C/W JCL Thermal Resistance, JunctiontoAmbient (Note 2) R 75 C/W JA Thermal Resistance, JunctiontoAmbient (Note 3) 260 C/W R JA ELECTRICAL CHARACTERISTICS Characteristic Symbol Value Unit V V Maximum Instantaneous Forward Voltage (Note 4) F 0.76 (I = 1.0 A, T = 25C) F J 0.84 (I = 2.0 A, T = 25C) F J 0.61 (I = 1.0 A, T = 125C) F J 0.68 (I = 2.0 A, T = 125C) F J Maximum Instantaneous Reverse Current (Note 4) I R (Rated dc Voltage, T = 25C) 20 A J (Rated dc Voltage, T = 125C) 1.0 mA J 2 2 2. Mounted with 700 mm copper pad size (Approximately 1 in ) 1 oz FR4 Board. 2 3. Mounted with pad size approximately 20 mm copper, 1 oz FR4 Board. 4. Pulse Test: Pulse Width 380 s, Duty Cycle 2.0%.