MC100ELT23
5 VDual Differential PECL
to TTL Translator
Description
The MC100ELT23 is a dual differential PECL to TTL translator.
Because PECL (Positive ECL) levels are used, only +5 V and ground
www.onsemi.com
are required. The small outline 8-lead package and the dual gate
design of the ELT23 makes it ideal for applications which require the
MARKING DIAGRAMS*
translation of a clock and a data signal.
The PECL inputs are differential; therefore, the MC100ELT23 can
8
accept any standard differential PECL input referenced from a V of
CC SOIC8
KLT23
5.0 V. D SUFFIX
8 ALYW
CASE 751
1
Features 1
3.5 ns Typical Propagation Delay
8
24 mA TTL Outputs
TSSOP8
Flow Through Pinouts
KT23
8
DT SUFFIX
ALYW
The 100 Series Contains Temperature Compensation
1 CASE 948R
Operating Range V = 4.75 V to 5.25 V with GND = 0 V 1
CC
Internal Input 50 K Pulldown Resistors
A = Assembly Location
These Devices are PbFree, Halogen Free/BFR Free and are RoHS
L = Wafer Lot
Compliant
Y = Year
W = Work Week
= PbFree Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
Semiconductor Components Industries, LLC, 2015
1 Publication Order Number:
August, 2015 Rev. 17 MC100ELT23/DMC100ELT23
Table 1. PIN DESCRIPTION
D0 1 8 V
CC
Pin Function
Qn TTL Outputs
D0 2 7 Q0
Dn, Dn PECL Differential Inputs
PECL TTL
V Positive Supply
CC
D1 3 6 Q1
GND Ground
D145 GND
Figure 1. 8Lead Pinout (Top View) and Logic
Diagram
Table 2. ATTRIBUTES
Characteristics Value
Internal Input Pulldown Resistor 50 k
Internal Input Pullup Resistor N/A
ESD Protection Human Body Model > 2 kV
Machine Model > 400 V
Moisture Sensitivity, Indefinite Time Out of Drypack (Note 1) PbFree Pkg
SOIC8 Level 1
TSSOP8 Level 3
Flammability Rating Oxygen Index: 28 to 34 UL 94 V0 @ 0.125 in
Transistor Count 91 Devices
Meets or exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
1. For additional information, see Application Note AND8003/D.
Table 3. MAXIMUM RATINGS
Symbol Parameter Condition 1 Condition 2 Rating Unit
V Power Supply GND = 0 V 7 V
CC
V Input Voltage GND = 0 V V V 0 to 6 V
I I CC
T Operating Temperature Range 40 to +85 C
A
T Storage Temperature Range 65 to +150 C
stg
Thermal Resistance (JunctiontoAmbient) 0 lfpm SOIC8 190 C/W
JA
500 lfpm SOIC8 130 C/W
Thermal Resistance (JunctiontoCase) Standard Board SOIC8 41 to 44 C/W
JC
Thermal Resistance (JunctiontoAmbient) 0 lfpm TSSOP8 185 C/W
JA
500 lfpm TSSOP8 140 C/W
Thermal Resistance (JunctiontoCase) Standard Board TSSOP8 41 to 44 5% C/W
JC
T Wave Solder PbFree <2 to 3 sec @ 260C 265 C
sol
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
www.onsemi.com
2