MC10EP16, MC100EP16
3.3 V / 5 VECL Differential
Receiver/Driver
Description
The EP16 is a worldclass differential receiver/driver. The device is
functionally equivalent to the EL16 and LVEL16 devices with higher
www.onsemi.com
performance capabilities. With output transition times significantly
faster than the EL16 and LVEL16, the EP16 is ideally suited for
interfacing with high frequency sources.
8 8
The V pin, an internally generated voltage supply, is available to
BB
1
1
this device only. For single-ended input conditions, the unused
differential input is connected to V as a switching reference voltage.
BB
V may also rebias AC coupled inputs. When used, decouple V
BB BB
SOIC8 NB TSSOP8 DFN8
and V via a 0.01F capacitor and limit current sourcing or sinking
CC D SUFFIX DT SUFFIX MN SUFFIX
to 0.5 mA. When not used, V should be left open. CASE 75107 CASE 948R02 CASE 506AA
BB
Under open input conditions (pulled to V ) internal input clamps
EE
will force the Q output LOW.
The 100 Series contains temperature compensation.
MARKING DIAGRAMS*
Features
8
8
220 ps Typical Propagation Delay
HEP16
Maximum Frequency = > 4 GHz Typical
HP16
ALYW
ALYW
PECL Mode Operating Range:
14
V = 3.0 V to 5.5 V with V = 0 V 1
CC EE 1
NECL Mode Operating Range:
8 8
V = 0 V with V = 3.0 V to 5.5 V
CC EE
KEP16
Open Input Default State
KP16
ALYW
ALYW
Safety Clamp on Inputs
14
1
Q Output Will Default LOW with Inputs Open or at V
1
EE
V Output
BB
SOIC8 NB TSSOP8 DFN8
These Devices are Pb-Free, Halogen Free and are RoHS Compliant
H = MC10 A = Assembly Location
K = MC100 L = Wafer Lot
5L = MC10 Y = Year
3B = MC100 W = Work Week
M = Date Code = Pb-Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
Semiconductor Components Industries, LLC, 2016
1 Publication Order Number:
August, 2016 Rev. 7 MC10EP16/D
3B M 5L M
MC10EP16, MC100EP16
Table 1. PIN DESCRIPTION
NC 1 8 V
CC
PIN FUNCTION
D*, D** ECL Data Inputs
Q, Q ECL Data Outputs
D 2 7 Q
V Reference Voltage Output
BB
V Positive Supply
CC
V Negative Supply
EE
D 3 6 Q NC No Connect
EP
(DFN8 only) Thermal exposed pad
must be connected to a sufficient ther-
mal conduit. Electrically connect to the
most negative supply (GND) or leave
V45 V
BB EE unconnected, floating open.
* Pins will default LOW when left open.
** Pins will default to V /2 when left open.
CC
Figure 1. 8Lead Pinout (Top View) and Logic Diagram
Table 2. ATTRIBUTES
Characteristics Value
Internal Input Pulldown Resistor 75 k
Internal Input Pullup Resistor 37.5k
ESD Protection
Human Body Model > 4 kV
Machine Model > 200 V
Charged Device Model > 2 kV
Moisture Sensitivity, Indefinite Time Out of Drypack (Note 1) Pb-Free Pkg
SOIC8 NB Level 1
TSSOP8 Level 3
DFN8 Level 1
Flammability Rating Oxygen Index: 28 to 34 UL 94 V0 @ 0.125 in
Transistor Count 167 Devices
Meets or exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
1. For additional information, see Application Note AND8003/D.
www.onsemi.com
2