MG2040, SZMG2040 ESD Protection Diodes Low Capacitance ESD Protection for High Speed Video Interface The MG2040 ESD protection diode is designed specifically to www.onsemi.com protect HDMI and Display Port with full functionality ESD protection and back drive current protection for V line. Ultralow capacitance CC MARKING and low ESD clamping voltage make this device an ideal solution for DIAGRAM protecting voltage sensitive high speed data lines. The flowthrough style package allows for easy PCB layout and matched trace lengths 18 UDFN18 2040M necessary to maintain consistent impedance for the high speed TMDS CASE 517CP 1 lines. 2040 = Specific Device Code Features M = Date Code = PbFree Package Full Function HDMI / Display Port Solution (Note: Microdot may be in either location) Single Connect, Flow through Routing for TMDS Lines Low Capacitance (0.35 pF Typical, I/O to GND) Protection for the Following IEC Standards: ORDERING INFORMATION IEC 6100042 Level 4 (8 kV Contact) Device Package Shipping UL Flammability Rating of 94 V0 MG2040MUTAG UDFN18 3000 / Tape & SZ Prefix for Automotive and Other Applications Requiring Unique (PbFree) Reel Site and Control Change Requirements AECQ101 Qualified and PPAP Capable SZMG2040MUTAG UDFN18 3000 / Tape & (PbFree) Reel This is a PbFree Device For information on tape and reel specifications, Typical Applications including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification HDMI Brochure, BRD8011/D. Display Port MAXIMUM RATINGS (T = 25C unless otherwise noted) J Rating Symbol Value Unit Operating Junction Temperature Range T 55 to +125 C J Storage Temperature Range T 55 to +150 C stg Lead Solder Temperature T 260 C L Maximum (10 Seconds) IEC 6100042 Contact (ESD) ESD 15 kV IEC 6100042 Air (ESD) ESD 15 kV Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. See Application Note AND8308/D for further description of survivability specs. Semiconductor Components Industries, LLC, 2014 1 Publication Order Number: October, 2017 Rev. 5 MG2040/DMG2040, SZMG2040 Pin 7 Pin 8 Pin 9 Pin 10 Pin 11 Pin 13 Pin 15 Pin 17 Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Center Pins, Pin 12, 14, 16, 18 Note: Common GND Only Minimum of 1 GND connection required = Figure 1. Pin Schematic I/O 1 GND 18 I/O 2 GND I/O 3 17 I/O I/O 4 16 GND I/O 5 I/O 6 GND 15 I/O I/O 7 14 GND I/O 8 GND 13 I/O 9 I/O 10 I/O 12 GND I/O 11 Figure 2. Pin Configuration Note: Pins 12, 14, 16, 18 and center pins are connected internally as a common ground. Only minimum of one pin needs to be connected to ground for functionality of all pins. www.onsemi.com 2